Linksys WIP330 manual Front and Side Panels, Icon Button Name Function

Page 12

Wireless-G IP Phone

Power LED

The Front and Side Panels

The power LED is located at the top of the IP Phone, while its buttons are located on the front and side panels.

Power LED	Blue/Red/Purple. The LED is a solid blue when the IP Phone is powered on and ready
	for phone calls. It flashes red when the IP Phone is not ready for phone calls.
	The LED alternates between blue and purple when the IP Phone is powered off and
	charging.

The buttons of the IP Phone are described in this table.

Icon

Button Name

Function

Soft Key

Selects the appropriate action

shown on the left- or right-

Navigation Pad

Soft Key

Soft Key

hand side of the screen

and Center

Call

Power

Navigation Pad

Lets you navigate menus and

Selection Key

and Center

select your choices

or End Call

Selection Key

Controls cursor for its web

browser

Call

Uses Internet phone line

Different Key

Enter Symbol

Choices or + Sign

or Space

Figure 2-2: Front Panel

4

Chapter 2: Getting to Know the Wireless-G IP Phone

The Front and Side Panels

Image 12

Contents Wireless- G Page How to Use this Guide Copyright and TrademarksWireless-G IP Phone Table of Contents Bottom Panel 20 Edit Outbound Proxy Port13 Enter Name 65 Edit Download URL Introduction WelcomeWhat’s in This User Guide? What’s in This User Guide? Getting to Know the Wireless-G IP Phone Bottom PanelFront and Side Panels Icon Button Name FunctionSymbol Volume Back PanelInserting the Battery into the Wireless-G IP Phone OverviewPowering on the Wireless-G IP Phone Connect the PowerWireless-G IP Phone Navigating the Wireless-G IP Phone Symbol Selection Setting up the Wireless-G IP Phone Select Wireless Network10 Enter WPA 13 Select SIP Settings 14 Edit Proxy 17 Save Register Proxy IP 18 Save Register Proxy Port 21 Save Expire Time 22 Save Phone Number 24 Save Password 27 Standby Screen Using the Wireless-G IP Phone LineOptionSecond Incoming Call KeyguardVoicemail Wireless-G IP Phone Configuring the Wireless-G IP Phone Instructions for Configuring the Wireless-G IP PhoneChapter Status Information Settings of the Wireless-G IP Phone Call Log MissedReceived Dialed Phone Book Option12 Add Person Network Settings DhcpFixed IP 16 NetworkWireless Set Wi-Fi23 Connecting to Wireless Network 27 Select Default Hotspot 28 Detect 32 Wi-Fi Profiles Profiles35 Change WPA-PSK 42 Change Transmit Key 44 Profile Added Hotspot 45 Select HotspotPhone Settings Ring OptionKeypad Tone WallpaperDate & Time 53 Change57 Select Time Zone Phone Password LanguageUpgrade 64 SelectSIP Settings 68 Edit Proxy IP -69 Enter Proxy72 Change 76 Change User Name Web Site Visiting a Web Site83 Edit Web 84 Add Web Site Web Cam Viewing a Web CameraSelect Return to return to the Web Cam screen Information 89 InformationAppendix a Troubleshooting Common Problems and SolutionsApplication Start and End Protocol IP Address Enable Wireless-G IP Phone Wireless-G IP Phone Power LED does not light up Frequently Asked Questions Can I receive calls while my network is down?Appendix B Glossary Appendix B Glossary Wireless-G IP Phone Wireless-G IP Phone Appendix C Specifications Network ProtocolsVoice Codecs 711 u/A-law, G.729a/b DBm for 802.11b and 802.11g @ Normal Temp RangeStorage Humidity 10% to 95% Non-Condensing 10% to 85% Relative Humidity, Non-CondensingAppendix D Warranty Information Limited WarrantyAppendix D Warranty Information Appendix E Regulatory Information FCC StatementAppendix E Regulatory Information Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Appendix F Contact Information Appendix F Contact Information