Linksys WIP330 manual Power LED does not light up

Page 73

Wireless-G IP Phone

8. Repeat steps 5-7 until you have entered all four port ranges for the IP Phone.

Application	Start and End	Protocol	IP Address	Enable

Internet phone 1	5060 to 5061	UDP	(IP address of IP Phone)	X

Internet phone 2	53 to 53	UDP	(IP address of IP Phone)	X

Internet phone 3	69 to 69	UDP	(IP address of IP Phone)	X

Internet phone 4	10000 to 20000	UDP	(IP address of IP Phone)	X

9.Check the Enable option for the port services you want to use.

10.When you have completed the configuration, click the Save Settings button.

4.The power LED does not light up.

Go through this checklist until your problem is solved:

•Remove the IP Phone’s battery from its compartment. Wait five seconds while the IP Phone resets itself. Insert the battery and power on the IP Phone.

•You may be using the wrong power adapter. Make sure the power adapter you are using is the one included with the IP Phone.

Appendix A: Troubleshooting

65

Common Problems and Solutions

Image 73

Contents Wireless- G Page Copyright and Trademarks How to Use this GuideWireless-G IP Phone Table of Contents 20 Edit Outbound Proxy Port Bottom Panel13 Enter Name 65 Edit Download URL Welcome IntroductionWhat’s in This User Guide? What’s in This User Guide? Bottom Panel Getting to Know the Wireless-G IP PhoneIcon Button Name Function Front and Side PanelsSymbol Back Panel VolumeOverview Inserting the Battery into the Wireless-G IP PhoneConnect the Power Powering on the Wireless-G IP PhoneWireless-G IP Phone Navigating the Wireless-G IP Phone Symbol Selection Select Wireless Network Setting up the Wireless-G IP Phone10 Enter WPA 13 Select SIP Settings 14 Edit Proxy 17 Save Register Proxy IP 18 Save Register Proxy Port 21 Save Expire Time 22 Save Phone Number 24 Save Password 27 Standby Screen LineOption Using the Wireless-G IP PhoneKeyguard Second Incoming CallVoicemail Wireless-G IP Phone Instructions for Configuring the Wireless-G IP Phone Configuring the Wireless-G IP PhoneChapter Status Information Settings of the Wireless-G IP Phone Missed Call LogReceived Dialed Option Phone Book12 Add Person Dhcp Network Settings16 Network Fixed IPSet Wi-Fi Wireless23 Connecting to Wireless Network 27 Select Default Hotspot 28 Detect Profiles 32 Wi-Fi Profiles35 Change WPA-PSK 42 Change Transmit Key 44 Profile Added 45 Select Hotspot HotspotRing Option Phone SettingsWallpaper Keypad Tone53 Change Date & Time57 Select Time Zone Language Phone Password64 Select Upgrade68 Edit Proxy IP -69 Enter Proxy SIP Settings72 Change 76 Change User Name Visiting a Web Site Web Site83 Edit Web 84 Add Web Site Viewing a Web Camera Web CamSelect Return to return to the Web Cam screen 89 Information InformationCommon Problems and Solutions Appendix a TroubleshootingApplication Start and End Protocol IP Address Enable Wireless-G IP Phone Wireless-G IP Phone Power LED does not light up Can I receive calls while my network is down? Frequently Asked QuestionsAppendix B Glossary Appendix B Glossary Wireless-G IP Phone Wireless-G IP Phone Network Protocols Appendix C SpecificationsVoice Codecs 711 u/A-law, G.729a/b DBm for 802.11b and 802.11g @ Normal Temp Range10% to 85% Relative Humidity, Non-Condensing Storage Humidity 10% to 95% Non-CondensingLimited Warranty Appendix D Warranty InformationAppendix D Warranty Information FCC Statement Appendix E Regulatory InformationAppendix E Regulatory Information Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Appendix F Contact Information Appendix F Contact Information