Wireless-G IP Phone
Chapter 3: Installing and Using the Wireless-G IP Phone
Overview
This chapter provides instructions for
Metal Contacts
into the IP Phone and then set it up for your wireless network and Internet phone service. Then you will be able to make and receive Internet phone calls.
Inserting the Battery into the Wireless-G IP Phone
To insert the battery, follow these instructions:
1.Remove the cover of the battery compartment. Push down on the button and slide the cover downward.
2.Insert the battery. Make sure the metal contacts of the battery line up with the metal contacts of the battery compartment.
3.Insert the door and slide it upward until it snaps into place.
Proceed to the next section, “Powering on the
Button
Figure 3-1: Press
the Button
Figure 3-2: Insert
the Battery
Chapter 3: Installing and Using the | 7 |
Overview