Linksys WIP330 manual Detect

Page 47

Connection to a New Hotspot

1.Scroll through the choices, and press the center selection key (in the middle of the navigation pad) to select the wireless hotspot you want to use.

If the hotspot you want is not shown, select Rescan for a new scan.

2.You will be notified when the IP Phone has connected to the hotspot, and a checkmark will appear next to the name of the hotspot.

3.A new window will appear. On the Select Hotspot screen, select IE Browser.

4.The web browser will automatically open. Follow the on-screen instructions to access the hotspot.

5.After you have gained access, you can browse the Internet.

If you want to save the new hotspot’s settings, follow these instructions:

1.When you are connected to the new hotspot, view the main menu.

2.Select Wireless.

3.Select Profiles.

4.Select Option.

5.Select Save <network name>.

Then you will be automatically returned to the Wi-Fi Profiles screen.

Chapter 4: Configuring the Wireless-G IP Phone

Wireless-G IP Phone

Figure 4-28: Detect	Figure 4-29: Connecting
Hotspot	to Hotspot

Figure 4-30: Getting IP	Figure 4-31: Select IE
Address	Browser
	39

Settings of the Wireless-G IP Phone

Image 47

Contents Wireless- G Page Copyright and Trademarks How to Use this GuideWireless-G IP Phone Table of Contents 20 Edit Outbound Proxy Port Bottom Panel13 Enter Name 65 Edit Download URL What’s in This User Guide? IntroductionWelcome What’s in This User Guide? Bottom Panel Getting to Know the Wireless-G IP PhoneIcon Button Name Function Front and Side PanelsSymbol Back Panel VolumeOverview Inserting the Battery into the Wireless-G IP PhoneConnect the Power Powering on the Wireless-G IP PhoneWireless-G IP Phone Navigating the Wireless-G IP Phone Symbol Selection Select Wireless Network Setting up the Wireless-G IP Phone10 Enter WPA 13 Select SIP Settings 14 Edit Proxy 17 Save Register Proxy IP 18 Save Register Proxy Port 21 Save Expire Time 22 Save Phone Number 24 Save Password 27 Standby Screen LineOption Using the Wireless-G IP PhoneVoicemail Second Incoming CallKeyguard Wireless-G IP Phone Instructions for Configuring the Wireless-G IP Phone Configuring the Wireless-G IP PhoneChapter Status Information Settings of the Wireless-G IP Phone Missed Call LogReceived Dialed Option Phone Book12 Add Person Dhcp Network Settings16 Network Fixed IPSet Wi-Fi Wireless23 Connecting to Wireless Network 27 Select Default Hotspot 28 Detect Profiles 32 Wi-Fi Profiles35 Change WPA-PSK 42 Change Transmit Key 44 Profile Added 45 Select Hotspot HotspotRing Option Phone SettingsWallpaper Keypad Tone53 Change Date & Time57 Select Time Zone Language Phone Password64 Select Upgrade68 Edit Proxy IP -69 Enter Proxy SIP Settings72 Change 76 Change User Name Visiting a Web Site Web Site83 Edit Web 84 Add Web Site Viewing a Web Camera Web CamSelect Return to return to the Web Cam screen 89 Information InformationCommon Problems and Solutions Appendix a TroubleshootingApplication Start and End Protocol IP Address Enable Wireless-G IP Phone Wireless-G IP Phone Power LED does not light up Can I receive calls while my network is down? Frequently Asked QuestionsAppendix B Glossary Appendix B Glossary Wireless-G IP Phone Wireless-G IP Phone DBm for 802.11b and 802.11g @ Normal Temp Range Appendix C SpecificationsNetwork Protocols Voice Codecs 711 u/A-law, G.729a/b10% to 85% Relative Humidity, Non-Condensing Storage Humidity 10% to 95% Non-CondensingLimited Warranty Appendix D Warranty InformationAppendix D Warranty Information FCC Statement Appendix E Regulatory InformationAppendix E Regulatory Information Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Appendix F Contact Information Appendix F Contact Information