Linksys WIP330 manual Setting up the Wireless-G IP Phone, Select Wireless Network

Page 20

Wireless-G IP Phone

Setting up the Wireless-G IP Phone

Before you begin, make sure your network has an active Internet connection.

1.Press and hold the Power button for two seconds.

2.The IP Phone will boot up and automatically scan for wireless networks.

Figure 3-6: Scan for

Wireless Networks

3.A list of wireless networks will be displayed and show their wireless network names (also known as Service Set Identifier or SSID), security status (a lock indicates wireless security), and signal strength, which is indicated by a bar graph.

Scroll through the network choices, and press the center selection key (in the middle of the navigation pad) to select the wireless network you want to use.

If the network you want is not shown, select Rescan for a new scan.

Figure 3-7: Select

Wireless Network

12	Chapter 3: Installing and Using the Wireless-G IP Phone
	Setting up the Wireless-G IP Phone

Image 20

Contents Wireless- G Page How to Use this Guide Copyright and TrademarksWireless-G IP Phone Table of Contents Bottom Panel 20 Edit Outbound Proxy Port13 Enter Name 65 Edit Download URL What’s in This User Guide? IntroductionWelcome What’s in This User Guide? Getting to Know the Wireless-G IP Phone Bottom PanelFront and Side Panels Icon Button Name FunctionSymbol Volume Back PanelInserting the Battery into the Wireless-G IP Phone OverviewPowering on the Wireless-G IP Phone Connect the PowerWireless-G IP Phone Navigating the Wireless-G IP Phone Symbol Selection Setting up the Wireless-G IP Phone Select Wireless Network10 Enter WPA 13 Select SIP Settings 14 Edit Proxy 17 Save Register Proxy IP 18 Save Register Proxy Port 21 Save Expire Time 22 Save Phone Number 24 Save Password 27 Standby Screen Using the Wireless-G IP Phone LineOptionVoicemail Second Incoming CallKeyguard Wireless-G IP Phone Configuring the Wireless-G IP Phone Instructions for Configuring the Wireless-G IP PhoneChapter Status Information Settings of the Wireless-G IP Phone Call Log MissedReceived Dialed Phone Book Option12 Add Person Network Settings DhcpFixed IP 16 NetworkWireless Set Wi-Fi23 Connecting to Wireless Network 27 Select Default Hotspot 28 Detect 32 Wi-Fi Profiles Profiles35 Change WPA-PSK 42 Change Transmit Key 44 Profile Added Hotspot 45 Select HotspotPhone Settings Ring OptionKeypad Tone WallpaperDate & Time 53 Change57 Select Time Zone Phone Password LanguageUpgrade 64 SelectSIP Settings 68 Edit Proxy IP -69 Enter Proxy72 Change 76 Change User Name Web Site Visiting a Web Site83 Edit Web 84 Add Web Site Web Cam Viewing a Web CameraSelect Return to return to the Web Cam screen Information 89 InformationAppendix a Troubleshooting Common Problems and SolutionsApplication Start and End Protocol IP Address Enable Wireless-G IP Phone Wireless-G IP Phone Power LED does not light up Frequently Asked Questions Can I receive calls while my network is down?Appendix B Glossary Appendix B Glossary Wireless-G IP Phone Wireless-G IP Phone Appendix C Specifications Network ProtocolsVoice Codecs 711 u/A-law, G.729a/b DBm for 802.11b and 802.11g @ Normal Temp RangeStorage Humidity 10% to 95% Non-Condensing 10% to 85% Relative Humidity, Non-CondensingAppendix D Warranty Information Limited WarrantyAppendix D Warranty Information Appendix E Regulatory Information FCC StatementAppendix E Regulatory Information Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Wireless-G IP Phone Appendix F Contact Information Appendix F Contact Information