Using the Speakerphone

1.Press the SPEAKERPHONE button and the phone automatically selects an open line.

2.Wait for a dial tone then dial a phone number.

3.Press SPEAKERPHONE when finished.

NOTE: Only one-way conversation is possible in speakerphone mode. When you are speaking, you are transmitting. When you are listening, you are receiving. You can’t do both at the same time. The phone will automatically switch between transmitting and receiving depending on the level of the voice or the room noise picked up by the speakerphone mic.

USING THE HEADSET

1.Press the HEADSET button. The HEADSET indicator blinks.

2.Press the line you want to use.

3.Wait for a dial tone then dial a phone number.

4.Press HEADSET to turn it off.

NOTE: If the headset is not connected, an error tone is heard when the HEADSET button is pressed.

RECEIVING CALLS

USING THE HANDSET

When the phone rings, the corresponding line’s indicator flashes rapidly.

1.Pick up the handset. The line is automatically selected.

2.When you are finished, hang up the handset.

USING THE SPEAKERPHONE

When the phone rings, the corresponding line’s indicator flashes rapidly.

1.Press the SPEAKERPHONE button. The speakerphone turns on automatically and selects a line.

2.When you are finished, press SPEAKERPHONE.

USING THE HEADSET

1.When the phone rings, the corresponding line’s indicator flashes rapidly.

2.Press the line button. If the headset mode is not on, you must first press HEADSET. The HEADSET indicator blinks.

3.When you are finished, press the HEADSET.

NOTE: Whether you are making or receiving a call, the caller will be disconnected if you press another line without putting the call on hold first.

SWITCHING BETWEEN THE SPEAKERPHONE, HANDSET, AND HEADSET

To switch to the speakerphone, press SPEAKERPHONE. The speakerphone indicator will come on. To switch to the handset, pick up the handset. The speakerphone or headset will go off.

To switch to the headset, press HEADSET. The headset indicator will come on.