GE 2-9191 manual To SET the LCD Contrast, To SET the Dial Mode, To Exit Setup

TO SET THE LCD CONTRAST

This adjustment allows optimization of the contrast and viewing angle of the display.

1.Press and hold the REVIEW up button then press and hold the REVIEW down button. Continue to hold both buttons for 3 seconds. SETUP MENU ^ v appears.

2.Press the REVIEW up button until LCD CONTRAST appears.

3.Press the DELETE button to show the current contrast setting. There are 5 levels of contrast, with the default set to 3.

4.To decrease the contrast, press REVIEW down. To increase, press REVIEW up.

5.Press DIAL to store the contrast setting and return to the LCD CONTRAST display.

TO SET THE DIAL MODE

This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing.

1.Press and hold the REVIEW up button then press and hold the REVIEW down button. Continue to hold both buttons for 3 seconds. SETUP MENU ^ v appears.

2.Press the REVIEW up button until T/P DIAL MODE appears.

3.Press the DELETE button to show the current dial mode. The default is set to tone.

4.To change the dial mode, press REVIEW up or down. The display will alternate between the two modes.

5.Press DIAL to store the dial mode and return to the T/P DIAL MODE display.

TO EXIT SETUP

To exit the setup mode after your changes have been made, you can immediately exit by selecting the EXIT SETUP menu and pressing the DIAL button.

NOTE: The phone will exit setup after 10 seconds if no buttons are pressed.

REMINDER: The time and date are programmed automatically when the first Caller ID information is successfully received after setup.

10