NOTE: If the low battery icon LOW 
appears in the display, you need to replace the batteries. It is important that you replace the batteries as soon as possible in order to maintain Caller ID operation.
During the replacing of batteries, a backup circuit in the unit will retain your stored information for up to 60 seconds. Write down any stored information you do not want erased.
IMPORTANT: If you’re not going to use the telephone for more than 30 days, remove the batteries because they can leak and damage the unit.
SETTING UP THE CALLER ID MENU
You should not plug the telephone into the wall line jack while setting up the Caller ID menu. An incoming call may invalidate the change if it was not yet saved. The phone must display xx CALLS before you can enter the setup menu.
1. Press and hold the REVIEW up button then press and hold the REVIEW down button. Continue to hold both buttons for 3 seconds. SETUP MENU ^ v appears.
2. At this point you can press either REVIEW up or down button to scroll among the 6 menu screens, which are:
• SETUP MENU ^ v
• LOCAL AREA CODE (default - -
• CID LANGUAGE (default English)
• LCD CONTRAST (default 3)
• T/P DIAL MODE (default tone)
• EXIT SETUP
3. You have 10 seconds following any key press before the phone will automatically
return to the CALLS summary screen.
SETUP MENU
deletedial
review
8