Using your Voyager 510S Headset with your desk phone
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing
visit: www.plantronics.com/healthandsafety
If your desk phone has a volume control, set it to
Powering the Headset on and off
To turn the headset on, press and hold the power/mute button for 3 seconds until the status indicator flashes blue. (See Step 1 on page 8).
To turn off, press and hold the button again for 3 seconds until the status indicator flashes red.
Placing, Answering, or Ending Calls on your Desk Phone
Desk phone Configuration
ALL phones with Handset Lifter
Phones without Headset button and NO Handset Lifter
Phones with Headset button and no Handset Lifter
To place a call | 1. Press Call Control Button | 1. Press Call Control Button | 1. Press Call Control Button |
| 2. Dial number | 2. Remove handset from cradle | 2. Press Headset button on phone |
|
| 3. Dial number | 3. Dial number |
To answer a call | 1. Press Call Control Button | 1. Press Call Control Button | 1. Press Call Control Button |
|
| 2. Remove handset from cradle | 2. Press Headset button on phone |
To end a call | 1. Press Call Control Button | 1. Press Call Control Button | 1. Press Call Control Button |
|
| 2. Place handset back on cradle | 2. Press Headset button on phone |
Muting a Call
To mute a call, press the Power/Mute button for less than 1 second.
To take the call off mute, press the Power/Mute button again.
Note: Pressing the Power/Mute button for more than 3 seconds will power off the headset.
Questions? For fast, efficient Technical Support call: