Plantronics 510S setup guide Pairing Headset and Base, Speaking Volume, Minor Adjust, Buttons

Page 14

Pairing Headset and Base

Your Voyager 510S Bluetooth Headset System comes from the factory with the headset and base already paired. However, if you have purchased a base unit separately, or if you wish to use a replacement headset with your existing base unit, the units must be paired as follows:

Note: Make sure your headset is not connected to any other Bluetooth device when attempting to pair.

1.On the back of your base unit, press and hold both the Speaking Volume Minor Adjust Control buttons simul- taneously until the on line indicator light flashes blue and the power light (on the front of the unit) flashes red.

2.On your headset, press and hold both the Listening volume adjust (+) button and the Call Control Button simultaneously until the red and blue indicator lights flash alternately.

3.Pairing is complete when the indicator light on the base is solid blue and the Status Indicator light on your headset flashes blue.

	Speaking Volume	Call Control Button & Talk/
	Minor Adjust
		On-line Indicator Light
	Buttons

Headset Base

(back view)

14Plantronics Voyager 510S Setup Guide

Image 14

Contents Easy Steps Plantronics Voyager 510S Package Contents Fit the Headset Install Eartip & Adjust fitTo Install a Different Eartip To Convert for Wearing on Left EarConfiguration a 2Connect Base to Desk PhoneConfiguration B Handset port or Headset port?Charge the Headset for at least 20 Minutes before using 3Connect Power and Charge HeadsetConnect Headset Base to power outlet Base Power AdapterAutomatic Handset Lifter 4Install Automatic Handset LifterConnect Handset Lifter power cord to Headset Base Button Determine Lifter position and height settingPower/Mute Lifter viewed Start with Lifter From backIf you do not hear a dial tone Use the Extender Arm to Stabilize Handset if needed Mount the Lifter in permanent positionMuting a Call Using your Voyager 510S Headset with your desk phonePlacing, Answering, or Ending Calls on your Desk Phone To Fine Tune Listening Volume Adjust Listening VolumeAdjust Speaking Volume Listening Volume ButtonSpeaking Volume Minor Adjustment Control Set the IntelliStandtm FeatureTo Fine Tune Speaking Volume IntelliStand SwitchMinor Adjust Pairing Headset and BaseSpeaking Volume ButtonsPairing your Voyager headset to your Bluetooth mobile phone Features and Options Voyager 510S Lights and Tones Indicator LightsLow Battery Warning Out of Range WarningTroubleshooting and Common Questions Can’t hear a dial tone at the headsetMaintenance Still having problems?Plantronics Limited Warranty Battery replacementPlantronics, Inc Encinal Street Santa Cruz, CA 95060 USA

Related manuals

Manual 15 pages 58.99 Kb