Plantronics 510S setup guide Configuration a, 2Connect Base to Desk Phone

S T E P

2Connect Base to Desk Phone

It is important for correct and safe operation that the base cord is installed into the proper jack of your telephone. Follow these instructions carefully, especially if your telephone has two jacks where

the handset was attached. Be sure to note or mark which jack was used for the handset.

Use Configuration A if:

You will use the Automatic Handset Lifter or…

Your phone does NOT have built-in headset functionality (no Headset button).

Configuration A

1.Unplug the handset coil

cord from the desk phone handset port [A], then plug it into the handset port [B] on the Headset Base.

A

Handset	Handset
Coil Cord

Headset Base (bottom view)

A B

2. Plug the short black Phone Cable that is pre-installed on the Headset Base into the now-open handset port [A] on the desk phone.

Plantronics Voyager 510S Setup Guide