Voyager 510S Lights and Tones
Indicator Lights
Base Status | Base Light |
Headset and base unit are | Solid red |
on and a wireless connection |
|
is established |
|
Headset Status | Status Indicator Light |
Power on | Flashes blue |
Charging | Flashes red |
Headset charging | Flashes yellow |
Headset fully charged | Solid yellow |
Bluetooth link active | Solid blue |
Headset in talk mode | Flashes blue |
Fully charged | Solid blue |
Battery low | Flashes red |
Pairing | Flashes red and blue |
Bluetooth device connected | Flashes blue |
Headset out of range or turned off
Red flashes slowly, then quickly (cycle then repeats slow & fast)
Tones
Out of Range Warning:
If you walk out of range of your base, your headset will issue audible tones at its operating limit.
If you are on a call, you will hear two tones when reaching edge of range, and again when back in range. If you stray out of range, active calls will be suspended. Calls will be
Low Battery Warning:
When battery is low, a single tone repeats every ten seconds. You should recharge the headset immediately.
Mute Warning/Reminder:
When Mute is first activated, a single high tone followed by a single low tone will sound. These tones will repeat every 30 seconds while Mute is active.
When Mute is deactivated a single low tone followed by a single high tone will sound.
Mute Reminder — A double low tone will sound every 30 seconds as a reminder that mute is activated.
Call Connect/Device Connect: Single high tone
Call Disconnect/Device Disconnect: Single low tone
Questions? For fast, efficient Technical Support call: