Handset Lifter Arm
B. Determine Lifter position and height setting
To determine the lifter position and height setting, you will first need to power the headset on and fit the headset.
1. Press and hold the power/mute button on the headset for 3 seconds until the status indicator flashes blue.
Power/Mute | Status Indicator |
Button |
|
2. Fit the headset over and behind your ear as described on page 3. |
3. Set the Lifter Height Switch to the lowest setting. |
Lifter viewed | Start with Lifter |
from back | |
| Height Switch in |
| lowest position |
4. Slide the Handset Lifter Arm under the handset until the lifter base touches the side of the phone.
5.Slide the Lifter up to where it nearly touches the handset earpiece and hold.
Slide Lifter under handset, then up toward the ear piece
Plantronics Voyager 510S Setup Guide