Honeywell 9900 manual RegBackup.exm, Modifying, SyChip & Philips Sections

RegBackup.exm

The RegBackup.exm file is located in the \IPSM folder and determines the content of the _RegBackup.reg file.

The RegBackup.exm file does NOT contain registry settings! Only REG files contain registry settings.

Sections

_TEMPLATE_ Section The _TEMPLATE_ section is a template of the basic registry sections. This section is not used when creating the _RegBackup.reg file. Use these subsections as a basis for modifications and additions to the file.

Backup Section When you backup the registry (see Backing Up the Registry on page 8-6), the include/ exclude settings in this section indicate what content to backup.

This default section should never be removed as it contains default excludes specified by Honeywell. It can, however be added to. Do NOT change the Mode (page 8-8)!

SyChip & Philips Sections

When you backup radio settings (see Backup Radio Settings on page 9-12), the include/ exclude settings in this section indicate what content to backup.

Modifying

Modifying the RegBackup.exm file allows you to include or exclude registry key sections and values during an export. Multiple subsections can be created below. All should be copied from the Template section which, itself, should not be modified.

To specify keys and values in the RegBackup.exm file, re-create the registry keys as sections and subsections in the tree structure just as they appear in the registry. The same rules that apply to copying directories apply here in that if you re-create a key from the registry, all the key’s values and subkey’s values will be copied unless there are values in the top-level key.

These registry values will be included in the _RegBackup.reg file.

Only the key or value name is needed in the EXM file and not the associated value data. The EXM file is a structure used to define the backup file and not the actual registry data.

Dolphin® Power Tools User’s Guide	Rev A	8 - 7
	8/6/08