Honeywell 9900 manual Editing the Autorun.exm File, Adding a Program Subsection, Pnpid

Keys in Each Programs’ Subsection

Each Programs’ subsection contains or can contain the following keys:

Key

Function

Required Keys—These keys must be present in each Program subsection.

Program	Specifies the command line to execute. This is the location of the program’s
	executable. If you want a Power Tool to launch at startup, enter the location of that
	tool’s EXE here.
Args	Specifies the command line arguments to execute at startup.
Wait	Determines if Autorun should wait for the program to complete and close before
	continuing to the next program in the sequence.
	• 0=Continue to the next program immediately
	• 1=Wait enabled
StartOption	Specifies the startup options for the program. Autorun launches the program only if
	the startup options entered here are met.
	• Blank= Always run the program.
	• X=See Start Options on page 4-4.

Optional Keys—These are keys you can add but don’t appear in the default file.

PNPID	Specifies a card description. This option needs to be entered only when PNPID or
	NONPNPID values are specified in the StartOption key.
DependIndex	Specifies the index of a dependent program.
DependExitCode	Specifies the required result of the dependent program. If the result of the
	dependent program does not equal the DependExitCode entered here, the current
	program will not be executed at startup.

Editing the Autorun.exm File

Edit Autorun.exm in EZConfig Editor. For details, see Working with Open EXM Files on page 2-7.

Adding a Program Subsection

To launch at startup, a new program must be a child section of the Programs section.

1.In EZConfig Editor, right click on the Programs section and select Append Child Section.

2.On the Add New Section window, enter the Name and Description and click OK.

3.The new section is added to the bottom of the list.

4.Use the click and drag method to move the section to the desired launch sequence.

Press and hold the ALT key to make sure that you move the section at the same level. Do not append the section to an existing section!

5.Right-click in the key area and select Append Key. You must add all the required Autorun keys; see Keys in Each Programs’ Subsection on page 4-3.

Dolphin® Power Tools User’s Guide	Rev A	4 - 3
	8/6/08