TP-Link TL-WA730RE manual Factory Defaults, Backup & Restore

Page 53

To upgrade the device's firmware, follow these instructions:

TL-WA730RE150Mbps Wireless Range Extender User Guide

)Note:

1There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the device itself, you can try to upgrade the firmware.

2Before upgrading the device’s firmware, you should write down some of your customized settings to avoid losing important configuration settings of device.

To upgrade the device's firmware, follow these instructions:

1.Download a more recent firmware upgrade file from the TP-LINK website (http://www.tp-link.com).

2.Enter the path name or click Browse… to select the downloaded file on the computer into the File blank.

3.Click Upgrade.

)Note:

Do not turn off the device or press the Reset button while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.

4.7.5 Factory Defaults

Selecting System Tools > Factory Default allows you to restore the factory default settings for the device on the screen shown in Figure 4-27.

Figure 4-27 Restore Factory Defaults

Click Restore to reset all configuration settings to their default values.

•Default User Name: admin

•Default Password: admin

•Default IP Address: 192.168.1.254

•Default Subnet Mask: 255.255.255.0

)Note:

Any settings you have saved will be lost when the default settings are restored.

4.7.6 Backup & Restore

Selecting System Tools > Backup & Restore allows you to save all configuration settings to your local computer as a file or restore the device's configuration on the screen shown in Figure 4-28.

46

Image 53

Contents Rev 1.0.0 TL-WA730RE 150Mbps Wireless Range ExtenderAll rights reserved COPYRIGHT & TRADEMARKSFCC RF Radiation Exposure Statement FCC STATEMENTCE Mark Warning Country National restrictionsRestriction Reason/remarkProduct Description 150Mbps Wireless Range Extender DECLARATION OF CONFORMITYETSI EN 300 328 V1.7.1 ETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN60950-12006Package Contents CONTENTSHardware Installation Chapter 3 Quick Installation GuideAppendix C Troubleshooting Appendix B Factory DefaultsAppendix D Specifications Appendix A Application ExampleConventions Package ContentsPackage Contents Overview of This GuideChapter 2 Hardware Installation Chapter3 Quick Installation Guide4.6 DHCP Introduces how to set your AP to be a DHCP server sothat the AP will automatically assign an IP address for your PCFeatures 1.2 Main FeaturesChapter 1 Introduction 1.1 Product Overview1.3.1 The Front Panel 1.3 AppearanceTL-WA730RE 150Mbps Wireless Range Extender User Guide LED ExplanationEnsure the Range Extender is powered on before it restarts completely 1.3.2 The Rear Panel2.3 Connecting the Device Chapter 2 Hardware Installation2.1 Before You Begin 2.2 Basic Requirements1. Connect the Cable or DSL modem to a Router 3.1 Configure the PC Chapter 3 Quick Installation GuideTL-WA730RE 1 Select Use the following IP address 3.2 Quick Setup Figure 3-9 Quick Setup Figure 3-11 AP List Figure 3-12 Quick Setup - Range Extender ModeB. When you choose Access Point, take the following steps TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.1 Status Chapter 4 Configure the Device4.3 QSS 4.2 Quick SetupMethod One To add a new deviceFigure 4-3 Add A New Device Next TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.4 Network 4.5.1 Wireless Settings 4.5 WirelessTL-WA730RE 150Mbps Wireless Range Extender User Guide TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.5.2 Wireless Security 1 Range Extender ¾ WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared key 2 Access Point TL-WA730RE 150Mbps Wireless Range Extender User Guide 4.5.3 Wireless MAC Filtering To modify or delete an existing entry To set up an entry, follow these instructions4.5.4 Wireless Advanced 4.5.5 Throughput Monitor 4.5.6 Wireless Statistics This page will be refreshed automatically every 5 seconds 4.6 DHCP4.6.1 DHCP Settings 4.6.3 Address Reservation 4.6.2 DHCP Clients ListThe changes wont take effect until the device reboots 4.7 System ToolsTo Reserve IP addresses To modify A Reserved IP address4.7.1 SNMP 4.7.2 Diagnostic Figure 4-23 Diagnostic 1 Only one user can use this tool at one time 4.7.3 Ping Watch Dog4.7.4 Firmware Upgrade To upgrade the devices firmware, follow these instructions 4.7.5 Factory Defaults4.7.6 Backup & Restore 2. Wrong process will lead the device unmanaged 4.7.7 RebootTo restore the devices configuration, follow these instructions 4.7.9 System Log 4.7.8 PasswordFigure 4-31 System Log Appendix A Application Example 3 Right-click the wireless connection icon “” on the screen of the PC and then select View Available Wireless Networks TL-WA730RE 150Mbps Wireless Range Extender User Guide Default Value Appendix B Factory DefaultsCommon Default Settings Wireless2. The LAN LED is not lit Appendix C Troubleshooting1. No LEDs are lit on the access point Physical and Environment Appendix D SpecificationsGeneral Appendix E Glossary TL-WA730RE 150Mbps Wireless Range Extender User Guide

Related manuals

Manual 68 pages 59.99 Kb