Siemens V1.2.33 manual Key Material File Management, Layer 2 Voice/Signaling, Layer 2 Default

Parameters

Key

A programmable key can be assigned a function or a speed dial number. Some keys have already been programmed, for example, with the func- tions "Disconnect" or "Loudspeaker". You can use up to 17 keys depending on the phone type. You can assign keys in the Selected_Dialing tab or the Function Keys tab. Enter a speed dial number or select a function from the drop-down list.

Key Material File Management

•Write File: Send server certificate to telephone.

•Delete File: Delete server certificate on the telephone.

Layer 2 Voice/Signaling

Voice connection and signaling with Æ Layer 2 support.

Layer 3 Voice/Signaling

•You can only set this if Æ Layer 3 support is active (Æ QoS L2/L3). The value describes the position in the Æ Layer 2 Priority value.

•Possible values: 0 ... 63.

Layer 2 Default

The default is Æ Layer 2 support.

LAN/PC port mode

•Specify the bandwidths you want the optiPoint phone to use. The nec- essary value depends on the bandwidth supported by the switch or router in the network.

Bandwidth			Application
10	Mbps half dup		For 10-Mbit networks in half duplex mode.
10	Mbps full dup		For 100-Mbit networks in full-duplex mode.
100		Mbps half dup	For 10-Mbit networks in half duplex1 mode.
100		Mbps full dup	For 100-Mbit networks in full-duplex2mode.
Auto negation

•You must restart the tool after making a change.

Language

Select your language in the drop-down list.

60