Siemens V1.2.33 Security profile, Security window seconds, Server type, Session Duration minutes

Page 66

Parameters

Security profile

You should define the Æ Security protocol setting if the optiPoint 400 stan- dard is connected to a HiPath 5000 system.

Three settings are available:

•off (voice encryption is disabled).

•reduced (voice encryption on one side only – Æ Gatekeeper encrypts data sent).

•on (voice encryption on both sides – Æ IP phone and Æ Gatekeeper encrypt data sent)

Security window (seconds)

A time window is used if the IP phone is connected to a HiPath 5000 sys- tem and Æ Security profile is activated (reduced or on). The tool only ac- cepts messages from the Æ Gatekeeper that arrive within the defined time window. The highest value you can enter here is 120 minutes.

Server type

In the list field, specify the communication system. The following options are available:

•Other

•HiQ8000

•Broadsoft

•Sylantro

The default is Other.

Session Duration (minutes)

Enter a maximum duration in minutes for a session here.

Session Timer

Switches the SIP Session timer on and off. The timer controls the dura- tion of a session.

Silence Suppression

The option can be enabled or disabled.

SIP Gateway Adress

Enter the Æ IP Address of the SIP gateways if gateway mode is in use.

SIP Gateway Port

Enter the Æ Port number for communicating with the SIP Gateway.

66

Image 66

Contents Administrator Manual Contents Configuration Tab OptiPoint typesHelp Functions Deployment Tool with TLS ParametersIntroduction Supported PhonesIntroduction Requirements Screen ResolutionFTP Service Operating SystemInstalling and Running the Program Installing and Running the ProgramInstalling the Program Click Start Installer for WindowsListing Connected IP Phones Listing Connected IP PhonesDevice List window Icons in the DeviceList window For the function Configure selected devicesIcons and Buttons Icons in the Operations windowCreating a Device List CTRL+A orSpecifying the Number of Scans Hiding List ColumnsMoving List Columns Column ContentsEditing a Device List Starting a ScanMAC address AddressStatus 164Resetting the Scan Result Stopping a ScanDevice type Deleting an Entry from the Device List Selecting a Device GroupSaving a Deployment File Loading the Deployment File CTRL+O orConfiguration ConfigurationConfiguration PreparationStarting Configuration File Transfer tabDialogs for optiPoint telephones Editing a Configuration Saving settings CTRL+S orTransfer file Minutes for Transferring a ConfigurationAdministrator password Minutes for optiPoint 300 advanceLog file Starting transferStopping transfer VerificationSaving and Loading Device Groups Saving Device GroupsCtrl+B Loading Device Groups Configuration OptiPoint 400 economy HFA OptiPoint typesOptiPoint 400 standard H450 OptiPoint 400 standard HFAOptiPoint 400 standard SIP Device type 400 standard SIPOptiPoint types Device type 400standardSIP Device type 410entryHFA, 410economyHFA OptiPoint 410 entry HFA, 410 economy HFAOptiPoint 410 standard HFA, 410 advance HFA Device type 410standardHFA, 410advanceHFADevice type 600officeHFA OptiPoint 600 office HFAOptiPoint 600 officeUP0/E Device type 600officeUP0/EOptiPoint 600 office SIP Device type 600officeSIPHelp Functions Checking the StatusHelp Functions Status Messages Following status messages may appearLog File Audio/Visual Indications Configuration TabAlert Indications ContactsDial Plan Country & LanguageDialling Codes Dial Plan 400 standard SIP V2.4, 600 office SIPFile Transfer File Transfer 400 standard H450, 400 standard SIP 2.x/SIPFile Transfer 410 standard HFA, 410 advance HFA Function Keys Http SettingsParameter Setting Key 1 to 10 or Instant MessagingIP Routing IP Routing 400 standard H450Default gateway Route Gateway Mask DNS server address Kerberos Kerberos 400 standard SIPKey & Lamp Module 1/2 Messaging ServicesKeyset Operations Keyset Operations 400 standard SIP V2.4, 600 office SIPMiscellaneous PasswordsPasswords 600 office HFA, 600 office UP0/E, 600 office SIP Miscellaneous 410 standard HFA, 410 advance HFAPersonal Directory PresencePresence 400 standard SIP Security Quality of ServiceQuality of Service 600 office UP0/E Security 400 standard SIP V2.4/SIP V3.0, 600 office SIPSIP Feature Configuration SelectedDialingSpeech parameters Telephony Configuration 400 standard HFA, 400 economy HFA Telephony ConfigurationTelephony Configuration 400 standard H450 Parameter Setting PBX/Gateway AddressTelephony Configuration 600 office HFA, 600 office UP0/E Time WAPParameters DescriptionCancel mobility password Audio ModeBeep On SIP Server Error Area codeCompression Codec Config filename prefixCodec Connection typeDhcp DSM application filename External access codeFTP password Emergency numberGatekeeper address H450 featuresFTP username Gatekeeper discovery addressInternational dial prefix IM Session TimerImport personal directory Java midlet filenameLayer 2 Default Layer 2 Voice/SignalingLayer 3 Voice/Signaling LAN/PC port modeLdap Server Addr Line Key action modeLayer 2 Priority Ldap template nameLoge filename New Domain PasswordOperating mode MaskPermit Decline Call Proximity TimerPBX/Gateway Address Port NumberQoS L2/L3 Registration TimerPstn acces code RealmRollover type Ring No Reply TimerRing Seen Timer RouteSecurity window seconds Session TimerSecurity profile Server typeSIP Registrar Port Snmp PasswordSIP Registrar Address SIP Routing ModelSnmp Trap Port Subscriber PasswordSnmp Trap IP Address Sntp Server IP AddressTerminating line preference System typeTag TimeUnused Timer User Change PasswordTrusted Certificates File Management Vlan Id User passwordWAP Mode Vlan MethodDial Plan Default RouteAbbreviations and Technical Terms DNSEpid FTPHFA HttpKDC LCD LANLdap LEDMCU PasswordMAC MIBPstn PBXPing RAMSnmp ROMSIP SntpURL UDPURI VlanVoIP WAPWSP Installation and Configuration Administration ScenariosConfiguring an FTP Server Administration ScenariosAdministration Scenarios Certificates Deployment Tool with TLSPublic Key Asymmetric Cryptography Deployment Tool with TLSTLS Certificate File FormatsUse of TLS by an IP Phone Operating the XML Management Interface over TLSConfiguring the Deployment Tool for TLS Installing the Deployment Tool TLS Handshake FailureTransferring Certificates to Phones Selecting a File for Transfer Transferring a Server Key Material File Transferring a Client Trusted Certificates File Ref. No. A31003-A2056-A105-63-76A9