Prestige 2000W_V2 User’s Guide
3.5 Rate
Do the following to set the transfer rate of the Prestige’s wireless connection to the AP.
1Select Wireless in the first menu screen (use the up or down arrow to highlight it and then press the Left key).
2Select Rate.
3Select Auto to have the Prestige automatically use the highest rate that the wireless connection to the AP will support. Select another rate to have the Prestige connect to the AP at only that rate.
7.Wireless
8.Restart
1.Information
SelectBack
5.Rate
6.WEP Select
7.Profiles
SelectBack
[1]Auto
[2]1M
[3]2M
SelectBack
3.6 WEP Encryption
WEP (Wired Equivalent Privacy) encryption scrambles all communications transmitted between the Prestige and the AP to keep them private.
1Select Wireless in the first menu screen (use the up or down arrow to highlight it and then press the Left key).
2Use the up or down arrow and the Left key to select WEP Select.
3Select the same length of WEP keys as the AP
7.Wireless
8.Restart
1.Information
SelectBack
6.WEP Select
7.Profiles
8.Auth Type
SelectBack
[1]None
[2]64bit
[3]128bit
SelectBack
34 | Chapter 3 Wireless LAN Setup Menus |