Prestige 2000W_V2 User’s Guide
Use the following screen to set up your Prestige to connect to the SIP server.
Note: Enter either the IP address of your SIP server or the URL domain name as given to you by your ITSP.
Figure 33 SIP Configuration
Table 19 IP Configuration
LABEL | DESCRIPTION |
|
|
SIP Proxy |
|
|
|
SIP URI | Type the SIP telephone number assigned to your Prestige by your ITSP |
| then the corresponding telephone IP address or URL, and finally a port |
| number with which to make a telephone connection. |
| Note that a URL can be used or domain name can be used instead of |
| an IP address. Your incoming server supplies the rest of the address. |
SIP Server Address | Type the IP address or domain name of the SIP server in this field. It |
| doesn’t matter whether the SIP server is a proxy, redirect or register |
| server. You can use up to 95 ASCII characters. |
SIP Server Port | Enter the SIP server’s listening port for SIP in this field. Leave this field |
| set to the default if your VoIP service provider did not give you a server |
| port number for SIP. |
Chapter 13 Administrator Web Configurator Screens | 97 |