Prestige 2000W_V2 User’s Guide
Table 7 STATIC
LABEL | DESCRIPTION |
|
|
Get IP Address | Click STATIC to manually enter a fixed IP address. |
Network Mode | Click DHCP to have the Prestige automatically obtain network settings at startup |
| from a Dynamic Host Configuration Protocol server. These settings are not |
| configurable. |
| Click PPPoE if your ISP uses |
|
|
Network IP | This is the IP address your Prestige uses to connect to the wireless LAN. Type the |
| address given to you by your network administrator. |
Network Subnet | The subnet mask specifies the network number portion of an IP address. Type the |
Mask | subnet mask given to you by your network administrator. See the appendix for |
| information on subnetting. |
Default Gateway | Type the gateway IP address of the device to which you want to connect your |
| Prestige. |
MAC Address | Every Ethernet device has a unique MAC (Media Access Control) address. The |
| MAC address is assigned at the factory and consists of six pairs of hexadecimal |
| characters, for example, 00:A0:C5:00:00:02. |
| This field is read only and cannot be configured. |
|
|
DNS Server IP | Type the DNS’ IP address for translating readable domain names into valid |
| computer IP addresses. |
Second DNS | Type a backup DNS IP address for the Prestige to use in the event that the |
Server IP | Prestige cannot connect to the preferred DNS. |
APPLY | Click APPLY to save your changes without restarting the Prestige. Your wireless |
| LAN, Internet and SIP settings changes do not take affect until you use RESTART |
| (in the navigation panel). |
CANCEL | Click CANCEL to begin configuring this screen afresh. |
|
|
12.7 Network Configuration: DHCP
If you were not assigned a specific IP address for your Prestige, use the following directions to set your Prestige to get it automatically via DHCP (Dynamic Host Control Protocol).
74 | Chapter 12 User Web Configurator Screens |