Prestige 2000W_V2 User’s Guide
Table 19 IP Configuration | (continued) |
|
|
LABEL | DESCRIPTION |
|
|
Registrar Server Address | Enter the SIP register server’s IP address or domain name in this field. |
| You can use up to 95 ASCII characters. |
| If you were not given a register server address, then enter the |
| address from the SIP Server Address field again here. |
Registrar Server Port | Enter the SIP register server’s listening port for SIP in this field. |
| If you were not given a register server port, then enter the port |
| from the SIP Server Port field again here. |
Register Expiry Time (sec.) | This field sets how long an entry remains registered with the SIP |
| register server. After this time period expires, the SIP register server |
| deletes the Prestige’s entry from the database of registered SIP |
| numbers. The register server can use a different time period. The |
| Prestige sends another registration request after half of this configured |
| time period has expired. |
OPTIONS Interval Timer | The OPTIONS Interval Timer periodically sends a signal to the SIP |
| Proxy Server to maintain the connection. |
| Type a time in minutes to send a KeepAlive signal to the SIP Proxy |
| Server. The default is 0, which disables this feature. |
Session Expiry Time (sec.) | Use this field to set the longest time that the Prestige will allow a SIP |
| session to remain idle (without traffic) before dropping it. |
Display Name | Type a name to interoperate with other SIP devices. It is recommend to |
| leave the default setting for this field. |
SIP Service Domain | Enter the SIP service domain name in this field (the domain name that |
| comes after the @ symbol in a full SIP URI). You can use up to 127 |
| ASCII Extended set characters. |
Authentication |
|
|
|
Registrar Username | Type in the username as supplied by your VoIP provider to access the |
| |
Registrar Password | Type in the password to associate with the username above. |
|
|
Registration Status | This displays either Registered or Not Registered depending on the |
| success of your Prestige’s connection to the |
APPLY | Click APPLY to save your changes without restarting the Prestige. Your |
| wireless LAN, Internet and SIP settings changes do not take affect until |
| you use RESTART (in the navigation panel). |
CANCEL | Click CANCEL to begin configuring this screen afresh. |
|
|
13.3 Voice Coding
A codec (coder/decoder) codes analog voice signals into digital signals and decodes the digital signals back into voice signals. The Prestige supports the following codecs.
13.3.1 G.711
G.711 is a Pulse Code Modulation (PCM) waveform codec. G.711 provides very good sound quality but requires 64kbps of bandwidth.
Pulse Code Modulation (PCM) measures analog signal amplitudes at regular time intervals and converts them into bits.
98 | Chapter 13 Administrator Web Configurator Screens |