BT 1100 Executive manual Connect the telephone line cord after charging your handset

Page 11

2. Install the battery in the handset and charge them for at least 16 hours

WARNING

Under no circumstances should non- rechargeable batteries be used. Only use the approved batteries. Using unapproved batteries will invalidate your warranty and may damage the telephone.

Fully discharging the batteries at least once a week will help them to last as long as possible. However, the charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries can be obtained from any BT Shop or from the helpline on 0845 601 2476.

Slide off the battery cover and install the battery. Replace the battery cover.

When the battery has been charged for at least 16 hours the display will show the

symbol; you can then connect the telephone line cord to the base.

Battery low warning

If the handset battery symbol is empty and you hear warning beeps, you will need to recharge your handset before you can use it.

Helpline

If you are experiencing difficulty, please call the BT On-Air Helpline on 0845 601 2476.

Battery performance

Your handset is supplied with NiMH batteries. These need to be initially charged continuously for 16 hours to reach full charge.

Note that the battery charge icon does not indicate the correct level when the batteries are first installed. The batteries must first be fully charged.

3. Connect the telephone line cord (after charging your handset)

Plug the line cord into the telephone wall socket.

Empty 1/32/3Full

11

Image 11
Contents User Guide At a glance Base This guide Setting up Using the telephoneMenu Structure Menu Structure Key features For your records IntroductionUnpacking your BT On-Air 1100 Executive General Safety informationConnect the power supply and switch on Setting upConnect the telephone line cord after charging your handset Battery low warningMaking and ending calls Using the telephoneRedial HandsfreeTo dial a number from the directory To switch secrecy on/offSecrecy Name and number directoryTo edit and delete directory numbers Internal callsPaging handsets Transferring callsKeyguard To switch keyguard off To switch keyguard onTo use your handset when the keyguard is on Alarm Alarm clockTo set the alarm To turn the alarm offRinging and Beeps TimerCaller Display To dial a number in the calls list To adjust ringer melody and volumeCalls list To enter the calls listTo set the date Keypad beeps and tonesTo set the time To change base station priority Base settingsTo change your System Code Registering additional handsets Using additional handsets and basesUsing additional handsets and bases DE-REGISTER To de-register a handset from the baseHelpline Technical information GuaranteeGeneral information Base Settings Switchboard compatibilitySwitchboard External Line Access Code To set the external line access codePrefix Wall Plug Screw Wall mountingPage Offices in Europe, North America, Japan and Asia Pacific