To register a handset to a base station (if you have changed the System Code from 0000)
Note
The number you save becomes the handset’s name (ie. ‘Handset 1’). You can rename the handset after registration, see page XX.
▲
COK
At the base:-
Press and hold down the PAGE button on the base until it starts to flash.
On the handset:-
Use the UP button to scroll to BASE.
Press OK to confirm.
The display will show REGISTER.
To de-register a handset from the base
▲Press the UP button to scroll to the BASE menu.
COK
▲
▼
COK
Press OK to confirm.
Use the UP or DOWN buttons to scroll to CUSTOM.
Press OK to confirm.
Use the UP and DOWN buttons to scroll to the required base number.
COK
▲
▼
COK
▼
Press OK to confirm.
Use the UP or DOWN buttons to scroll to BASE SETTINGS.
Press OK to confirm.
Use the DOWN button to scroll to
HANDSETS.
Press OK to confirm.
At this stage if you require you can edit the base name.
Press OK to confirm.
Enter the PIN code using the keypad.
Press OK to confirm.
The display will now flash SEARCHING FOR BASE.
C OK | Press OK to confirm. |
▼Use the DOWN button to scroll to
DE-REGISTER.
C OK | Press OK to confirm. |
1 2 3 Enter the System Code.
C OK | Press OK to confirm. |
▲Use the UP or DOWN buttons to
▼scroll to the handset that you want to
You will then see a list of the available handset numbers.
Use the UP and DOWN buttons to scroll to the number you require.
Press OK to confirm.
After a few seconds the handset will be registered and display:
COK
COK
Press OK to confirm.
This will time out and go back to idle.
Or
Press the C button until you get back to idle.
The handset is now
Base 1
Handset 2
C 
OK C can also be pressed to return to idle.
23