BT 1100 Executive manual Wall mounting, Wall Plug Screw

Page 28

Wall mounting

WALL PLUG SCREW

WALL

122mm

1Push the base-mount forward onto the rear of the base.

2Once slotted into the rear of the base, slide upwards to lock into position.

If wall mounting your BT On-Air 1100

Executive, use this guide for position.

• Make sure that you are not drilling into any
hidden wiring and check that the power	122 mm

cable will reach from the mains socket to the charger. Switch the power adaptor off at the mains and remove the adaptor plug from its socket.

• Drill two holes 25mm deep using a 3mm drill, 122mm apart to take the wall plugs.

• Put wall plugs into the drill holes and then insert both screws. Leave 2-3mm between the head of the screw and the wall. You are now able to mount the base to the wall.

• Fit the base onto the two screws.

If necessary, tighten or loosen the screws for the best fit.

• Put the handset back in the base and switch the power back on at the wall socket.

28

Image 28

Contents User Guide At a glance Base Setting up Using the telephone This guideMenu Structure Menu Structure Key features Unpacking your BT On-Air 1100 Executive IntroductionFor your records Safety information GeneralSetting up Connect the power supply and switch onBattery low warning Connect the telephone line cord after charging your handsetUsing the telephone Making and ending callsHandsfree RedialTo switch secrecy on/off SecrecyName and number directory To dial a number from the directoryInternal calls Paging handsetsTransferring calls To edit and delete directory numbersTo use your handset when the keyguard is on To switch keyguard off To switch keyguard onKeyguard Alarm clock To set the alarmTo turn the alarm off AlarmCaller Display TimerRinging and Beeps To adjust ringer melody and volume Calls listTo enter the calls list To dial a number in the calls listTo set the time Keypad beeps and tonesTo set the date To change your System Code Base settingsTo change base station priority Using additional handsets and bases Using additional handsets and basesRegistering additional handsets To de-register a handset from the base DE-REGISTERHelpline General information GuaranteeTechnical information Switchboard compatibility Switchboard External Line Access CodeTo set the external line access code Base SettingsPrefix Wall mounting Wall Plug ScrewPage Offices in Europe, North America, Japan and Asia Pacific