If you make a mistake, the machine will announce “Error” and reset itself to the previous security code.
To check your security code
CODE/SET
•Press the CODE/SET button. The machine will announce and display the current security code.
Switching the answering machine on
To remotely switch on your answering machine
•Dial your phone number.
•After 20 rings, the machine will automatically switch on and answer the call.
•You can now hang up, leave a message or enter your security code to operate the answering machine’s functions. The answering machine remains on and will take new incoming calls.
If the machine is switched off because the recording capacity is full:
•Dial your phone number.
•After 20 rings the machine answers and you hear,
Remote access
“Hello, your call cannot be taken at the moment and you cannot leave a message, so please call later.”
•Enter your security code to access the remote functions. You will have to delete some of your messages after hearing them, if you want the answering machine to remain on.
Accessing the answering machine
To access your answering machine from another phone
•Dial your phone number
•When you hear your outgoing message press the ✱ button. The machine announces ‘Please enter your security code.’
•Enter your security code.
•If the security code is correct you hear, “You have ÔxÕ new messages” and the messages are played back. If there are no new message you hear “You have no new messages.”
•At the end of the last message, the machine announces, “End of messages”, then “To hear main menu, press 1, to delete all messages press 5.”
30