Clicomm CWP-100 manual Firmware Management, Call Forwarding, Vibration Mode, Setting Forward NUM

8.3.7. Firmware Management

You can return to the factory reset or update the firmware.

①Select “7: Firmware” to check the current firmware version.

1:Load Default

2:Firmware Ver.

3:Firmware Update

4:Update Server

②Select “1: Load Default” to return to the factory reset.

③ Select “2: Firmware Ver.” to check the current version.

④ Select “3: Firmware Update” to update the firmware from the assigned server.

⑤ Select “4: Update Server” to set the server for updating the firmware.

8.3.8. Call Forwarding

You can forward the incoming call to the previously assigned phone number.

①Follow the steps as Menu ”4: Extra Setting” ”8: Call Forwarding”.

1:Setting

2:Forward NUM

②Select “1: Setting” and then choose the conditions for enabling the call forwarding functions.

1:Disable

2:Unconditional

3:Busy

4:No Answer

③Select “2: Forward NUM” and then input the phone number to forward the call.

④Once you enable the call forwarding function, the CWP-100 will display “CallForward ON” on the LCD main screen.

8.3.9. Vibration Mode

You can change the CWP-100 to vibrate instead of the melody ring for the incoming call.

①Press * for three seconds to change to the vibration mode.

② Once the vibration mode is enabled, the CWP-100 display icon on the LCD.

26