Clicomm CWP-100 manual Incoming Call Processing Configuration, Auto Answering

Waiting Indication) and enables the user to use external voice mail server.

Parameter	Description
	The user can use external voice mail server when the service provider
Use External Voice	supports Voice Mail server. The user can simultaneously use auto
	answering function that the CWP-100 supports itself. In case there is a
Mail System	new message from the external voice mail server, the CWP-100 will
	display a message icon. The user may check the message by calling his
	mail sever that the Internet service provider provides.

9.3.3. Incoming Call Processing Configuration

The CWP-100 provides the services as below for incoming calls.

9.3.3.1. Auto Answering

The CWP-100 answers the incoming call automatically and records the message that the caller leave. (You can use Auto Answering function only with G.723.1A codec.)

The description and default value for auto answering function is as follows.

Parameter				Description	Default
Waiting Time	Set the waiting time that the auto answering function operates.				5sec
		The user can access the message center to check the saved
Msg.Center PIN		message or edit the greeting message by pressing “*”, PIN
		Code, and then	SEND	in order. The user will hear the IVR and	*0000
Code(4 digits)
		may follow the directions. The PIN Code should always start
		with “*”.

Please notice that the internal auto answering machine is available only when the voice codec is assigned as G.723.1A.

The saved messages will be deleted when the CWP-100 power goes out. But the greeting message will remain.

You may record the greeting message for maximum of 20 minutes.

9.3.3.2. Call Forwarding

The CWP-100 can forward the incoming call to the previously assigned phone number.

Parameter	Description	Default
Forwarding	Set the conditions for call forwarding.	Unconditional

31