Clicomm CWP-100 manual Firmware Upgrade and Factory Reset, Firmware Upgrade via Display Menu

Page 37

10. Firmware Upgrade and Factory Reset

You easily upgrade the new firmware with a simple process.

10.1. Firmware Upgrade via Display Menu

You can upgrade the firmware with the CWP-100 LCD display menu. This process is available only when the network is in normal state and connected properly.

①Select MENU and follow the steps as “4: Extra Setting” ”7: Firmware”.

1:Load Default.

2:Firmware Ver.

3:Firmware Update

4:Update Server

②Select “2. Firmware Ver.” to check the current firmware version.

③Select “4. Upgrade Server” to check the server address for the upgrade.

④Select “3. Firmware Update” to start upgrading the firmware.

CAUTION: Do not interfere until upgrading the firmware is completed. Upgrading procedure normally takes about one minute. The system will restart automatically when the process is completed.

Image 37

Contents Page Table of Contents Supplementary Services Character Input Using Keypad CWP-100 Overview Quantity Description Product DescriptionHardware Overview Controls Description AM Menu LCD Icon OverviewCWP-100 Installation Installation OverviewWireless LAN Access Point Scan Basic ConfigurationNetwork Setting VoIP Setting Wireless Setting PWD Chang 120049 AMAP Scan Device Addr Wlan Mode System SettingChannel WEP Setting Key Size Key SelectingStatic IP Setting Current SettingAdsl Setting Dynamic IP Dhcp SettingAdsl Password Yes NoServer Setting VoIP SettingServer Setting Name Setting Codec Setting NAT Traversal SIP ServerCodec Setting Name SettingNAT Traversal NAT Traversal using Stun server NAT Function Stun Address NAT Router IP NAT TimerNAT Traversal without using Stun server NAT Session Timer Making a Phone Call Basic ServicesReceiving a Phone Call Extra functions on Call 8800 8801 Call WaitingPhonebook Supplementary ServicesRegister Delete SearchOne By one Erase All Call History Extra SettingCheck Recent Dialed/Received/Missed Calls Delete CallsScreen Message Setting Melody SettingTime Server Setting Melody Selection Melody VolumeAlarm Setting Time Zone SettingPhone Lock Setting Alarm Cancel Alarm Time Alarm Melody Alarm VolumeSetting Forward NUM Vibration ModeDisable Unconditional Busy No Answer Firmware ManagementPage Network Mode Configuration Network ConfigurationMiscellaneous Network Configuration Fqdn VoIP ConfigurationUse External Voice Mail Server Supplementary Function ConfigurationAuto Answering Incoming Call Processing ConfigurationDial Plan Outgoing Call Processing ConfigurationExamples for Dial Plan Miscellaneous Functions NAT Traversal ConfigurationStun Firmware Upgrade via Display Menu Firmware Upgrade and Factory ResetLoad Default Firmware Ver Firmware Update Update Server Firmware Upgrade via FTP System Reset by Factory Value Symbolic Characters Character Input Using KeypadEnglish Character