Clicomm CWP-100 manual Outgoing Call Processing Configuration, Dial Plan

Condition	Unconditional : The CWP-100 immediately forwards all the
	incoming calls to the previously assigned phone number.
	Busy : The CWP-100 forwards the incoming call when the
	channel is in use.
	No Answer: The CWP-100 forwards the incoming calls to the
	previously assigned phone number when the CWP-100 user
	does not answer the phone for 30 seconds.
Call Forwarding	Set the phone number to forward the incoming call.	N/A
Number

9.3.4. Outgoing Call Processing Configuration

The CWP-100 provides the services as below for outgoing calls.

9.3.4.1. Dial Plan

The CWP-100 edits the outgoing phone number according to the rules that the user assigns. The user can set up to 20 entries for dial plan.

Parameter	Description
	The pattern that the user input while dialing. The user can use the digit and
	characters below to find the pattern.
Number	0 ~ 9 number : General phone number.
	? : any single digit.
	~ : any numbers of digits.
	The outgoing call will operate immediately without termination digit if the
LEN	pattern that the user input is identical to the ones saved on Number, and the
	length of them is identical to the one saved on LEN.
TRNC	Eliminate the phone numbers at the front as the saved value on TRNC if the
	pattern that the user input is identical to the ones saved on Number.
Prefix	Add the phone numbers at the front as the saved value on Prefix if the pattern
	that the user input is identical to the ones saved on Number.
Postfix	Add the phone numbers at the end as the saved value on Postfix if the pattern
	that the user input is identical to the ones saved on Number.
Block	Reject the outgoing call phone if the pattern that the user input is identical to
	the ones saved on Number.
Dest. Address	Attempt the outgoing call to the assigned IP address as the destination line if
	the pattern that the user input is identical to the ones saved on Number.

32