Clicomm CWP-100 manual NAT Traversal Configuration, Miscellaneous Functions

Page 35

When the user picks up the handset and dial the phone number, the CWP-100 starts searching the pattern that coincide with the recent dial plan entries (from the bottom to the top).

In case the user dial “00123” and press “#” to make an outgoing call;

The CWP-100 will edit the final dialing number as “5551231004” and attempt the outgoing VoIP call.

In case the user dial “85556677” and press “#” to make an outgoing call;

The CWP-100 will edit the final dialing number as “5556677” and attempt the outgoing VoIP call to “192.168.0.41”.

In case the user dial “5550001” and press “#” to make an outgoing call;

The CWP-100 will not edit the final dialing number since there is no pattern that coincide with the dial plan entries, and attempt the outgoing call to “5550001”

9.3.4.2. Miscellaneous Functions

 

Parameter

 

 

 

 

 

Description

 

Default

 

 

 

 

Press

 

 

after dialing the phone number to assign that the dialing

 

 

 

 

 

 

SEND

 

Use

 

 

Last Digit

 

is completed and attempts the outgoing call. The user may set the

 

 

 

 

 

“SEND”

 

 

 

 

 

 

 

 

 

 

 

Configuration

 

CWP-100 to attempt the outgoing cal after an assigned time without

 

 

 

 

 

button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressing

SEND.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use Speed

 

Enable the speed dial function.

 

disable

 

 

Dial

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speed Dial

 

The user can assign up to 20 speed dial numbers for the phone

 

N/A

 

 

 

 

 

 

 

 

 

 

 

Setting

 

numbers or IP addresses that are mainly used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9.4. NAT Traversal Configuration

The CWP-100 can enable NAT traversal when the CWP-100 has a private IP behind NAT environment. Then the CWP-100 is able to make and receive external VoIP calls behind NAT. The user may use the external STUN server or directly use the NAT router’s IP address to use NAT traversal.

Parameter

Description

Default

 

Select NAT traversal.

 

 

Not Use : Do not use NAT.

 

NAT Traversal

STUN : Use NAT traversal through STUN server.

Not Use

 

Manual : Use NAT traversal manually when there is no appropriate

 

 

STUN server.

 

 

 

 

34

Image 35
Contents Page Table of Contents Supplementary Services Character Input Using Keypad CWP-100 Overview Quantity Description Product DescriptionHardware Overview Controls Description AM Menu LCD Icon OverviewCWP-100 Installation Installation Overview120049 AM Basic ConfigurationWireless LAN Access Point Scan Network Setting VoIP Setting Wireless Setting PWD ChangKey Size Key Selecting System SettingAP Scan Device Addr Wlan Mode Channel WEP SettingStatic IP Setting Current SettingYes No Dynamic IP Dhcp SettingAdsl Setting Adsl PasswordSIP Server VoIP SettingServer Setting Server Setting Name Setting Codec Setting NAT TraversalNAT Traversal Name SettingCodec Setting NAT Traversal without using Stun server NAT Function Stun Address NAT Router IP NAT TimerNAT Traversal using Stun server NAT Session Timer Receiving a Phone Call Basic ServicesMaking a Phone Call Extra functions on Call 8800 8801 Call WaitingRegister Supplementary ServicesPhonebook One By one Erase All SearchDelete Delete Calls Extra SettingCall History Check Recent Dialed/Received/Missed CallsMelody Selection Melody Volume Melody SettingScreen Message Setting Time Server SettingAlarm Cancel Alarm Time Alarm Melody Alarm Volume Time Zone SettingAlarm Setting Phone Lock SettingFirmware Management Vibration ModeSetting Forward NUM Disable Unconditional Busy No AnswerPage Miscellaneous Network Configuration Network ConfigurationNetwork Mode Configuration Fqdn VoIP ConfigurationUse External Voice Mail Server Supplementary Function ConfigurationAuto Answering Incoming Call Processing ConfigurationDial Plan Outgoing Call Processing ConfigurationExamples for Dial Plan Miscellaneous Functions NAT Traversal ConfigurationStun Load Default Firmware Ver Firmware Update Update Server Firmware Upgrade and Factory ResetFirmware Upgrade via Display Menu Firmware Upgrade via FTP System Reset by Factory Value English Character Character Input Using KeypadSymbolic Characters