5980 BT Synergy 3205 UG [2-2] 23/3/04 2:10 pm Page 37
BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980
Additional handsets & bases | 37 |
|
|
Register handset to a different make of base station
1.To put the base in registration mode, see the base station user guide.
At the handset:
2.Press and scroll or to Registration and
press .
Display shows Base
3.Enter the base number
handset to and press .
4.Enter your base PIN and press .
Display will show Base search 1, 2, 3 and the symbol will flash. When the handset locates the base, the handset will be automatically selected and shown on the display.
5.Press to confirm. The handset is registered.
To see the base station identity number
1.Press then to display Setup and press .
2.Press to scroll to Base Id and press .
The identity number is displayed.
5. Press and hold to return to standby.
The base must be GAP compatible.
If the handset does not locate the base, the handset will return to the previous menu.
Try to register again using a different base number and ensure you are close enough the the base.
The base identity number is the individual code number of the base station.