BT 3205 manual Internal calls, Transferring calls, Until Internal Call is displayed

Page 38

5980 BT Synergy 3205 UG [2-2] 23/3/04 2:10 pm Page 38

BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980

38 Additional handsets & bases

Internal calls

If you have more than one handset registered to the base, you can make internal calls between handsets.

1.Press and hold

Int

R

until Internal Call is displayed.

2.Enter the handset number you want to call, (1-5). The receiving handset rings and the display shows INT and the number of the handset calling.

3.Press to end the call.

Transferring calls

You can transfer an external call to another handset registered to the base.

During an external call:

1.Press and hold

Int

R

until Internal Call is displayed.

2. Press R then the number of the handset you want (1-5).

The caller is put on hold.

3.When the other handset answers you can talk to them

and press to transfer the call. Or

Image 38
Contents User Guide Welcome… BT Synergy 3205 UG 2-2 23/3/04 203 pm This guide Getting startedEnvironmental Using SMS Guarantee SafetyGeneral To subscribe to the SMS Cleaning Dialling modeGetting started Handset rangeYour BT Synergy 3205 SMS is now ready for use Attaching the belt clip optional Getting to know your phone Handset buttonsBase Display icons This is where the icons will appear SynergyScroll and to select volume to confirm Navigating the menusMenu map SMSUsing the phone Call timerUsing the phone Handsfree Redial SecrecyPaging PhonebookNow either press Press Number is displayed, enter the telephoneNumber and press To return to standbyUsing the phone Baby call Room monitor mode To switch baby call off Press twice Press to scroll to OffBT Synergy 3205 UG 2-2 23/3/04 210 pm Handset settings Set time and dateRinger volume Press then to display Handset Menu and pressKeypad lock To confirm Press to scroll to Handset Name and pressPress To delete the current name and then use Base settings Select a base Default settings Your BT Synergy 3205 is now reset to its default settingsPause after picking up line Handset and base default settings areHandset & base ringer volume Internal and External handset Caller Display and Call Waiting Caller DisplayShows Name Press Again to return to your first caller Call WaitingSecond caller Additional handsets & bases Automatically selected and shown on the display Press Then scroll To Setup and pressEnter For the base you want to register to De-register handsetsAdditional handsets & bases Until Internal Call is displayed Internal callsTransferring calls Handset priority Additional handsets & bases SMS Text Messaging Welcome to the SMS Text Messaging service on yourCost of the fixed line service For example, to type the word ‘sirs’ Standard method Using SMSFasTxT predictive texting Button Character Copy of the message is kept in the Outbox Enter the number you want using the keypadPress to confirm the message. The display shows Message to Press Again to send. The display shows SendingReceiving an SMS message Once registered, SMS message delivery is 24 hoursTo read new SMS messages SMS Text Messaging SMS Text Messaging To the SMS menu To exit and return to idle mode at SMS Service Centre numbers These numbers have been pre-loaded into the BT SynergyMessages 9 Send To change the SMS Centre phone numbersHelp Or replace them if necessary If using more than one base, check that you areCharging properly Switched on Connected to the correct base. SeeOption in the base Problems Possible causeFitted Cannot adjust an Possible problems with SMS You receive an incoming call Help That message, e.g Recipient may have an SMS enabled phoneTurns off permanent voice text message delivery Safety information General informationGeneral information Guarantee BT Synergy 3205 UG 2-2 23/3/04 208 pm Technical information TTEConnecting to a switchboard Declaration of ConformanceScroll to Pause Setup and press Date of purchase Place of purchase Serial number Offices worldwide