BT 3205 manual Or replace them if necessary, If using more than one base, check that you are

Page 54

5980 BT Synergy 3205 UG [2-2] 23/3/04 2:08 pm Page 54

BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980

54	Help


	Problems	Possible cause

	You cannot link up	Is	flashing in the display? You may be out of
	with the base station	range, move closer to the base.
		Check that the base is connected to the mains power
		and switched on.
		Are the batteries low or flat? If so, charge the batteries
		or replace them if necessary.
		If using more than one base, check that you are
		connected to the correct base. See page 29.

	No ring on the handset	Check that the ringer volume is switched on, see page 25.
		Check that the base is plugged into the phone socket
		and that it is also connected to the mains power and
		switched on.

	Buzzing noise on my	Sometimes, your BT Synergy 3205 SMS and other
	radio, TV, computer	DECT GAP compatible handsets can interfere with other
	or hearing aid	electrical equipment if placed too close. Try moving at
		least one metre away from such appliances.

	The handset is not	Check that the base is plugged into the mains socket
	charging properly	and switched on.

Image 54

Contents User Guide Welcome… BT Synergy 3205 UG 2-2 23/3/04 203 pm This guide Getting startedEnvironmental Using SMS Guarantee SafetyGeneral To subscribe to the SMS Cleaning Dialling modeGetting started Handset rangeYour BT Synergy 3205 SMS is now ready for use Attaching the belt clip optional Getting to know your phone Handset buttonsBase Display icons This is where the icons will appear SynergyScroll and to select volume to confirm Navigating the menusMenu map SMSUsing the phone Call timerUsing the phone Handsfree Redial SecrecyPaging PhonebookNow either press Press Number is displayed, enter the telephoneNumber and press To return to standbyUsing the phone Baby call Room monitor mode To switch baby call off Press twice Press to scroll to OffBT Synergy 3205 UG 2-2 23/3/04 210 pm Handset settings Set time and dateRinger volume Press then to display Handset Menu and pressKeypad lock Press to scroll to Handset Name and press Press To delete the current name and then useTo confirm Base settings Select a base Default settings Your BT Synergy 3205 is now reset to its default settingsHandset and base default settings are Handset & base ringer volume Internal and External handsetPause after picking up line Caller Display and Call Waiting Caller DisplayShows Name Call Waiting Second callerPress Again to return to your first caller Additional handsets & bases Automatically selected and shown on the display Press Then scroll To Setup and pressEnter For the base you want to register to De-register handsetsAdditional handsets & bases Internal calls Transferring callsUntil Internal Call is displayed Handset priority Additional handsets & bases Welcome to the SMS Text Messaging service on your Cost of the fixed line serviceSMS Text Messaging Using SMS FasTxT predictive textingFor example, to type the word ‘sirs’ Standard method Button Character Enter the number you want using the keypad Press to confirm the message. The display showsCopy of the message is kept in the Outbox Message to Press Again to send. The display shows SendingReceiving an SMS message Once registered, SMS message delivery is 24 hoursTo read new SMS messages SMS Text Messaging SMS Text Messaging To the SMS menu To exit and return to idle mode at SMS Service Centre numbers These numbers have been pre-loaded into the BT SynergyMessages 9 Send To change the SMS Centre phone numbersHelp Or replace them if necessary If using more than one base, check that you areCharging properly Switched on Connected to the correct base. SeeProblems Possible cause Fitted Cannot adjust anOption in the base Possible problems with SMS You receive an incoming call Help Recipient may have an SMS enabled phone Turns off permanent voice text message deliveryThat message, e.g Safety information General informationGeneral information Guarantee BT Synergy 3205 UG 2-2 23/3/04 208 pm Technical information TTEConnecting to a switchboard Declaration of ConformanceScroll to Pause Setup and press Date of purchase Place of purchase Serial number Ofﬁces worldwide