BT 3205 manual SMS Text Messaging

Page 48

5980 BT Synergy 3205 UG [2-2] 23/3/04 2:08 pm Page 48

BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980

48 SMS Text Messaging

3.Press or to scroll through and select the

message you want to read, then press to confirm. The message is displayed along with the sender’s number and when it was sent.

4.Press to return to standby. Or

Press to select another menu option.

To forward a message

You can send a received message on to another person.

1.Press until SMS is displayed. Then scroll to Inbox

and press .

The message list is displayed, starting with the newest message.

2.Use or to scroll to the message you want to

forward, then press . The message is displayed.

3.Press to confirm, then scroll to Forward.

4.Press , then enter the phone number you want to send the message to.

Or

Image 48
Contents User Guide Welcome… BT Synergy 3205 UG 2-2 23/3/04 203 pm This guide Getting startedSafety General To subscribe to the SMS CleaningEnvironmental Using SMS Guarantee Dialling modeGetting started Handset rangeYour BT Synergy 3205 SMS is now ready for use Attaching the belt clip optional Getting to know your phone Handset buttonsBase Display icons This is where the icons will appear SynergyScroll and to select volume to confirm Navigating the menusMenu map SMSUsing the phone Call timerUsing the phone Handsfree Redial SecrecyPaging PhonebookPress Number is displayed, enter the telephone Number and pressNow either press To return to standbyUsing the phone Baby call Room monitor mode To switch baby call off Press twice Press to scroll to OffBT Synergy 3205 UG 2-2 23/3/04 210 pm Handset settings Set time and dateRinger volume Press then to display Handset Menu and pressKeypad lock Press to scroll to Handset Name and press Press To delete the current name and then useTo confirm Base settings Select a base Default settings Your BT Synergy 3205 is now reset to its default settingsHandset and base default settings are Handset & base ringer volume Internal and External handsetPause after picking up line Caller Display and Call Waiting Caller DisplayShows Name Call Waiting Second callerPress Again to return to your first caller Additional handsets & bases Press Then scroll To Setup and press Enter For the base you want to register toAutomatically selected and shown on the display De-register handsetsAdditional handsets & bases Internal calls Transferring callsUntil Internal Call is displayed Handset priority Additional handsets & bases Welcome to the SMS Text Messaging service on your Cost of the fixed line serviceSMS Text Messaging Using SMS FasTxT predictive textingFor example, to type the word ‘sirs’ Standard method Button Character Enter the number you want using the keypad Press to confirm the message. The display showsCopy of the message is kept in the Outbox Message to Press Again to send. The display shows SendingReceiving an SMS message Once registered, SMS message delivery is 24 hoursTo read new SMS messages SMS Text Messaging SMS Text Messaging To the SMS menu To exit and return to idle mode at SMS Service Centre numbers These numbers have been pre-loaded into the BT SynergyMessages 9 Send To change the SMS Centre phone numbersHelp If using more than one base, check that you are Charging properly Switched onOr replace them if necessary Connected to the correct base. SeeProblems Possible cause Fitted Cannot adjust anOption in the base Possible problems with SMS You receive an incoming call Help Recipient may have an SMS enabled phone Turns off permanent voice text message deliveryThat message, e.g Safety information General informationGeneral information Guarantee BT Synergy 3205 UG 2-2 23/3/04 208 pm Technical information TTEConnecting to a switchboard Declaration of ConformanceScroll to Pause Setup and press Date of purchase Place of purchase Serial number Offices worldwide