Telephone Operations
Placing a Call
1.Press the TALK button (TALK button will illuminate GREEN) and dial the number you wish to call.
2.To end the call press the TALK button or place the handset in the base.
Answering a Call
1.Remove handset from base. You will automatically be connected.
OR
2.Press the TALK button.
Refer to BOOST Clarity Power and Volume Control for information on adjusting volume controls (Page 14).
Temporary Tone
If you have rotary (pulse) dial service, you can change from pulse to touch tone (tone) during a call.
1.Make phone call and wait until it is connected.
2.Press the * key. Keys pressed after this are sent as tone signals.
3.The phone will automatically reset to rotary (pulse) service after the call ends.
Visual Ringers
Visual ringers are located in both the hand- set antenna and the base of the telephone. When an incoming call is received, these lights will flash. The handset visual ringer will also stay lit while the phone is in use.
Flash
The FLASH button is activated to use custom calling services such as Call Waiting or Three Way Calling. Please contact your local telephone company for information on these services.
Mute
The MUTE button allows the user to conduct a private conversation that you do not want the person on the other end to hear. While in the mute mode, the MUTE button will illumi- nate RED and the microphone in the handset is disabled. Pressing the MUTE button again will disengage the MUTE feature.
Redial/Pause
The RD/P button operates both the last number redial and the pause feature.
Last Number Redial:
The last number dialed (up to 32 digits) is stored in the redial memory until another number is dialed.
To use this feature:
1.Press the TALK button.
2.When you hear the dial tone, press the RD/P button.
3.The phone will automatically dial for you.
Pause Feature:
Programming in a pause will cause the phone to wait four (4) seconds before dialing additional numbers. This feature
16