Memory Storage
Memory Storage Locations
The C430 has ten (10) indirect or two touch memory locations on the telephone
Three (3) Emergency Storage buttons are located on the handset. These storage buttons can be programmed with numbers of up to 16 digits.
Storing Numbers into Memory:
1.Press the MEM button.
2.Dial the number you wish to store.
3.Press the MEM button again.
4.Press either the emergency button or the number on the key pad that you wish to store the number to.
5.A long beep will indicate the programming process is complete.
Dialing from Memory:
1.Press the TALK button.
2.Press the MEM button.
3.Press the number on the key pad where the desired number has been stored.
4.The call will automatically dial.
To Dial From Emergency Storage Location:
1.Press the TALK button.
2.Press the desired emergency button.
3.The call will automatically dial.
Editing Numbers Stored in Memory:
Replace a stored number by programming a new number in its place.
Deleting Numbers from Memory:
1.Press and release the MEM button for (3) three seconds .
2.Enter the location number
3.Press the DEL button to erase the memory. ERASE MEMO and the location number will be displayed.
4.Press DEL again to confirm.
5.A long beep will indicate the process is complete.
NOTE: During the memory storage process the TALK button will flash GREEN.
In the event of a power outage, memory is retained of at least six (6) hours.
18