Caller ID Operations

The REPEAT call icon will light if the C430 receives more than one call from the same number.

There will be message to indicate end of CID list.

Placing a call from Caller ID List

1.From stand by use the UP/ DOWN arrows to scroll through Call List

2.Select the desired number by pressing CALL. Selected number will flash. Use the Up and Down Scroll to view available dialing options (7 digits, 10 digits or 11 digits).

3.Press CALL to select the desired call format (see below). The number will stop flashing.

4.Press CALL to dial.

When you place calls using Caller ID infor- mation, you have three (3) dialing options to select from:

1.7 digit number (123-4567)

2.7 digit number plus area code

(890-123-4567)

3.1 plus area code plus 7 digit number (1-890-123-4567)

Deleting Calls from Call list

1.While reviewing the Caller ID, press DEL to delete the displayed caller infor mation. The display flashes “ERASE?”

2.Press DEL to select. The display briefly reads, “CID ERASED.” The next Caller ID entry appears automatically or the dis play reads, “– NO CALLS –” if the list is empty.

Phone numbers cannot be deleted while it is in the flashing mode.

Deleting All Caller ID Information

1.While reviewing the Caller ID, hold down DEL for three (3) seconds. The display flashes “ERASE ALL?”

2.Press DEL to select. The display briefly reads “ALL CID” and “ERASED” and then “— NO CALLS —”.

At any time, you can press FLASH one time to return to standby mode. Or it will return to standby automatically when 30 seconds has elapsed without any keys being pressed.

Call Waiting

When you are on an existing call, you will hear a beep. The LCD will display the incoming calls caller ID information. To answer the waiting call, press FLASH. The original call will be placed on hold and you will be connected with the waiting call. To return to the original call, press FLASH.

If you do not access the waiting call, the caller ID information is transferred into the call list as a viewed call.