Feature Set-up
E
3.Press CALL to confirm the selection.
4.Press the UP (▲) or DOWN (▼) to go to the next menu.
If the CID mode is set to off, the LCD will display time and date and the display will read “CID IS OFF”.
Setting Time and Date
Default Time/Date “12:00 AM 01/01”
The
If the time setting is lost during a power outage, the clock will flash when power received again.
1.Press UP until the display reads, “TIME/DATE”.
2.Press CALL to start changing the date. The display shows the current time and date on the top line, e.g. “12:05AM 12/20” with the month digits flashing.
3.Press UP (▲) or DOWN (▼) to change the month digits.
4.Press CALL once to select. After the month digits are set, the date digits flash.
5.Press UP (▲) or DOWN (▼) to change the date digits.
6.Press CALL once to select. After the date digits are set, the hour digits flash.
7.Press UP (▲) or DOWN (▼) to change the hour digits.
8.Press CALL once to select. After the hour digits are set, the minute digits flash.
9.Press UP (▲) or DOWN (▼) to change the minute digits.
10.Press CALL once to select. After the minute digits are set, AM/PM will flash.
11.Press UP (▲) or DOWN (▼) to for either AM or PM.
12.Press CALL once to select. After AM or PM is selected, the time/date digits will be blank.
13.Press CALL once to display the time/date again or press UP (▲) or DOWN (▼) to go to the next menu.
Setting Contrast
Default: Level 2
1.Press CALL once to enter the Contrast Level selection mode. The current selected level flashes.
2.Press UP (▲) or DOWN (▼) to change the level.
3.Press CALL to select level desired.
4.Press UP (▲) or DOWN (▼) to advance to the next menu.
N G L I S H
13