Getting Started
CHOOSING A LOCATION
1.This phone requires a modular phone jack (RJ11C) and a standard 120V AC wall outlet.
2.Plug the AC Adapter directly into outlet.
3.Do not plug other appliances into the same outlet or have outlet controlled by a wall switch.
4.Choose a location that is out of the way of normal activities.
CAUTION: USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 400MA.
Always connect the AC Adapter to the phone before you connect it to the AC power. When you finish, disconnect the AC power before you disconnect it from the phone.
INSTALLATION
Connecting Your Telephone
Carefully remove your cordless telephone from it’s box. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase.
Check to be sure that you have all items that come with your telephone. You should have a HANDSET, BASE UNIT, AC ADAPTER, TELE-
PHONE LINE CORD, BELT CLIP AND OWNERS MANUAL. A BATTERY is also included and is located in the battery compartment.
USE ONLY WITH CLASS TWO
POWER SOURCE
PULSE/TONE BOOST
ON/OFF
Diagram A: Table/Desktop Installation
If at any time you have questions about your telephone please contact our Customer Service Department at:
Table/Desktop Installation
1.Plug one end of the supplied modular telephone line cord into the jack marked TEL located on the back of the telephone base as shown in Diagram A.
2.Plug the modular telephone line cord’s other end into a modular phone jack.
3.Insert the supplied AC Adapter’s plug into the jack marked 9V DC 400mA located on the back of the telephone base.
4.Plug the adapter into a standard 120V AC power (electrical) outlet.
5.Lift the base’s antenna to a vertical position.
8