CHAPTER 7
IN CASE OF DIFFICULTY
If any problem should occur during operation of your DIALOGUE RC, review the list below. Should the difficulty persist, contact AMERIPHONE or your authorized dealer before sending the phone for service.
SYMPTOM | CAUSE AND REMEDY |
|
|
No dial tone | – Check all phone line connections. |
|
|
No power | – Check power connection. |
|
|
Does not dial out | – Check all phone line connections and power |
| connection. |
| – Change to pulse dialing and try again. |
|
|
Does not dial memory number | – No number programmed in memory. |
|
|
Remote Transmitter does not work | – Check or replace battery. |
| – Check channel settings. |
| – Make sure no part of the DIALOGUE RC |
| system is on or near metal surfaces or electrical |
| equipment. |
|
|
No audible ring | – Make sure the ringer is not set to "Off" position. |
|
|
Does not scan through memory | – Turn on Scan function. |
|
|
Scanning too fast/slow | – Program Scan rate to a slower/faster setting. |
| (Dialogue |
|
|
Cuts in and out while speaking/ | – Avoid speaking at the same time as the other |
listening | party. Take turns. |
|
|
SENSITIVITY ADJUSTMENT
YOU MUST CONTACT AMERIPHONE BEFORE MAKING THE FOLLOWING ADJUSTMENT:
Callers can’t hear your voice when using the optional headset with integrated microphone
–Turn HEADSET MIC GAIN adjustment, located on bottom of unit, clockwise to increase sensitivity, counterclockwise to decrease.
12