![](/images/new-backgrounds/1309047/30904725x1.webp)
•
•
Voice Activated answering is off,
•
•
Unanswered call indicator is on.
”0“ (operator) is programmed into the first memory location of M1.
•Voice Mail indicator is off,
•Remote Flash switch is off,
2 | Press 0 on the keypad to | 3 Press SCAN button. |
| turn it off; or Press 1 key on |
|
| the keypad to turn it on. |
|
2 | Press 0 key to turn it off; or | 3 Press SCAN button. |
| Press |
|
| Page 5 for rate selection guide. |
|
2Press MUTE twice.
2Press HEADSET twice.
2Press FLASH/PAUSE twice.
2 | Dial the number (up to | 3 | Select the memory button. Press once for first location, or |
| 40 digits). |
| twice for second location. |
|
|
|
|
2 | Dial the number. | 3 | Press ON/OFF button to hang up. |
2The number is dialed in 7 seconds.
2When the desired directory location is lit, press it again.
3Press Remote Transmitter to hang up.
2The first number stored under M1 is dialed.
3Press Remote Transmitter once to hang up.
2Press ON/OFF button to hang up.
2Press Remote Transmitter once to hang up.
2It hangs up automatically after one minute of silence or when it detects dial tone.
11