Issue operational commands.
View StorageLibrary status and information.
Test StorageLibrary functionality.
Control Buttons
The labels for the four control buttons are displayed in the corners of the LCD. All buttons have soft function for different modes of operation, i.e. the functions of the buttons change during different activities. The actual function for each button is always visible on the display.
LED Indicators
The two LED indicators are green and amber. They indicate the StorageLibrary activity as follows:
Green LED on: The StorageLibrary is either running or ready for operation.
Green LED blinking: Short blinks followed by long intervals indicate that the library is in low power standby mode.
Amber LED on: Fault LED; the StorageLibrary has encountered an electrical or mechanical failure.
Standby Switch
A switch on the front panel provides a Library Standby mode. If the switch is pushed when the library is active, the library completes the current operation and then goes offline and enters standby mode. See Standby Functionality for more details.
Rear Panel
The figure below shows the rear panel of the StorageLibrary.
Figure 2. Rear Panel of the StorageLibrary with 1 Full-Height SCSI Drive Installed
Power supply | Back panel |
|
with fans | cover plates | Cooling fans |
Ethernet
connector
Main power switch, | Tape drive | SCSI | Emergency eject tool. |
power outlet | with fan | connectors | (RTC battery and drive |
and fuse |
|
| power extension cable |
|
|
| behind cover.) |
Cooling Fans
StorageLibrary Installation and User Guide | 5 |