Tandberg Data T40 manual Verifying Hardware, Maintenance Menus, Diagnostics Menu, Item name

Models: T40

1 95
Download 95 pages 21.36 Kb
Page 79
Image 79

The following components of the library have LEDs:

Library

Ethernet status LED

The Maintenance Menus

Table 7. Maintenance Menus - Item Name and Description

Item name

Library FW upgrade

Prepare to Ship

Reboot

Restore default

Clear WEB password

Description

Upgrades the library FW through RMI

When selected, the robotics is positioned for installing the transport locking screws.

The magazines are ejected to facilitate the installation.

The library cannot be safely shipped with cartridges in the magazines.

The Prepare to ship command must be run before the library is transported to reinstall the transport locking screws and to remove all cartridges in the library.

Performs a hard reset of the library.

Sets the library settings to their factory default values.

Clears the WEB password (from FPI only)

The Diagnostics Menu

Table 8. Diagnostics Menu - Item Name and Description

Item name

Capture logs

Description

Displays a log that contains information about library and drive configuration, event log and error log. This log can be saved to a file or sent via e-mail to technical support.

System test

Cycle test

Runs a test of the library hardware.

Starts a test where cartridges are moved randomly between magazine slots and between the drive and the magazines.

Verifying Hardware

1.The library uses one SCSI ID for each SCSI tape drive. Verify that the drive SCSI IDs are set to unique SCSI IDs that are not used by any other SCSI device on the same bus. Depending on other devices attached to the same SCSI bus and their SCSI IDs, you may need to change the SCSI ID of the tape drive(s) before you can use the library.

2.Verify that the system recognizes the tape drives during the boot process.

3.Verify that the SCSI host adapter recognizes the tape drives during its initialization.

4.Verify that the status on the librarys front panel interface is OK.

5.Verify that the power cable is inserted correctly.

6.Verify that the SCSI cables are properly connected at both ends. Check that the cables are not damaged, and verify the lengths of your SCSI cabling. The length of the internal SCSI cabling inside the library is 30cm. This length must be included in any calculation of cable length.

7.Verify that the SCSI bus is properly terminated. Only the devices physically at the beginning and end of the cable must be terminated.

StorageLibrary Installation and User Guide

71

Page 79
Image 79
Tandberg Data T40 manual Verifying Hardware, Maintenance Menus, Diagnostics Menu, Item name

T40 specifications

Tandberg Data T40 represents a significant advancement in data storage technology, offering users a robust and reliable solution for managing and preserving their information. This external tape drive is designed for small to medium-sized businesses that require high-capacity backup and archiving options. The T40 seamlessly combines efficiency with cutting-edge technology, making it a favored choice among IT professionals.

One of the standout features of the Tandberg Data T40 is its native capacity, which supports 1.5TB of storage per cartridge. With data compression, this capacity can effectively double, allowing for up to 3TB of data to be backed up in a single cartridge. This high capacity minimizes the number of tapes needed for extensive data storage, streamlining the backup process.

The T40 utilizes LTO technology, specifically LTO-5, LTO-6, or LTO-7, depending on the model. LTO, or Linear Tape-Open, is known for its high performance and reliability, offering fast data transfer rates. The T40 can achieve transfer speeds of up to 140MB/s, significantly reducing backup windows and enhancing overall productivity. Its backward compatibility ensures that users can access data stored on previous LTO generations, providing additional flexibility and security for businesses transitioning to newer technologies.

Additionally, the T40 features a simple, user-friendly interface that facilitates easy operation and maintenance. Equipped with a built-in LCD display, users can easily monitor the status of the tape drive, eliminating unnecessary guesswork. The drive's design supports extensive connectivity options, including USB 3.0 and SAS interfaces, making it compatible with various systems and infrastructure setups.

The Tandberg Data T40 is also designed with durability in mind. Its robust construction includes features that protect against dust and other environmental factors, ensuring the longevity of the device. Furthermore, its energy-efficient design helps reduce operational costs, making it an economical choice for budget-conscious organizations.

In summary, the Tandberg Data T40 is a powerful external tape drive that combines high capacity, fast performance, and reliability. Its LTO technology, ease of use, and durability make it an invaluable asset for businesses looking to safeguard their critical data while maximizing storage efficiency. Whether for backup or archiving needs, the T40 stands out as a versatile and dependable solution in the data storage landscape.