Stor
ageLibrary Installation and User Guide
43
The Barcode Scan is configured
with the Setup
Wizard.
After the initial se
tup of your library you can
later
access the Barcode Scan configuration screens direct
ly:
From the
RMI
, select
Setup >
Library
From the
FPI
, select
Setup >
Library
The library is equipped with an audible alarm that is activated at certain error conditions. The alarm
can be enabled/disabled from the
front panel inte
rface or the remote management interface
. The
default for the library is audible alarm disabled.
The Audible Alarm is configured
with the Setup
Wizard.
After the initial se
tup of your library you can
later
access the Audible Alarm configuration screens dir
ectly:
From the
RMI
, select
Setup >
Library
From the
FPI
, select
Setup >
Library
The library supports system monitoring via SNMP and SNMP Notifications. To enable SNMP the
remote management interface must be running. To enable SNMP notific
ations you need to register
the IP address of the notification recipient (host).
The library ignores all SNMP SET operations, so external management applications cannot register
themselves to receive SNMP traps from the library. The
SNMP notification scree
n
lets you manually
register
an
external application.
SNMP notification
can only be set
up
by
the
Administrator
from the remote management interface.
The screen lists existing IP address.
The Port number is fixed to 162 UDP.
The
user needs to register the
IP address of the notification recipient in the empty IP address field
displayed on the screen.
If you want to disable SNMP notifications enter 0.0.0.0 in the IP address field.
Note that
this
disables
notification only. The library will continue to process
SNMP Get requests
as long as the RMI is
enabled.
Note
You need to install the appropriate MIB for your FW version on the host on which
the SNMP manager is running.
The path to open the appropriate screen is:
From the
RMI
, select
Setup > No
tification
The library can be configured to automatically send e
-
mail notifications to a specified e
-
mail address
whenever an issue of a particular severity level occurs with one of its components.
The information in the e
-
mail notific
ation provides a
RAS ticket
, a short problem description and a
possible cause which may be of help to you or a customer service engineer.
Before you can configure e
-mail notifications, you must configure the librarys e-
mail account so that
the library can
send notifications to the designated recipient.
There are three filter levels of e
-
mail notifications: