16
Installing the Library
Figure
10
.
StorageLibrary
Mounted in a Rack, Rear View
The f
igure above gives a rear
-
end
view of the
StorageLibrary
mounted in a rack. The
two screws on
each side connect
the
left and right rail assemblies to
the rack.
Installing the
L
ibrary
After mounting, you must
connect the
cable
s
to
the library. Two sets of ca
bling instructions are
available:
For
libraries with SCSI tape drives
For libraries
with Fibre Channel tape drives
For instructions on cabling a library with SCSI tape drives,
see
Connecting
Library
Cables
(SCSI).
For instructions on cabling a library with Fibre Channel tape drives,
see
Connecting
Library
Cables
(Fibre
Channel)
.
If your library
includes both SCSI and Fibre Channel tape drives, cable the tape drive following the
appropriate instructions for that tape drive type
.

Connecting Library Cables (SCSI)

Use this procedure if you are installing a library that includes SCSI tape drives.
F
igure
11
.
StorageLibrary
C
abling (SCSI)