54
Getting Status and Information
SCSI ID <value as applicable>
Fibre Channel ID <value as applicable>
Fibre Topology <value as applicable>
Fibre Channel Speed <value as applicable>
Assigned P
artition <1, 2, 3, or 4>
Control Path <Enabled, Disabled>
Drive Serial Number (Drive SN): <value>
Drive Firmware Version (Drive FW): <value>
World Wide Name
World Wide Node Name
The following partition information is available from the Partitions/Drive rep
ort:
Partition Number
Control Path
<No or
Yes,
Drive ID>
S
tatus
<online/offline>
Number of s
lots
Drive ID numbers for drives in the partition
Total number of cartridges
Barcode Mode <6 Character or 13 Character>
Autoclean <Enabled or Disabled>
The path to
open the report from the
RMI
is
Reports > Partitions/Drive Settings.
Viewing Network Settings
The Network Settings report provides information on the following library settings:
Network Settings
Address mode (static or dynamic), IP address, subnet mask, ga
teway, and
MAC address
Notification
SNMP server IP address, e
-
mail address, n
otification enabled or
disabled,
notification severity
The path to open the report from the
FPI
or from the
RMI
is
Reports > Network Settings.
Viewing Statistics
The Viewing Stati
stics report captures the statistics of the library.
Gets (Fetches)
Puts (Stows)
Power on Hours
Time since drive cleaning
The path to open the report from
FPI or RMI
is
Reports > Statistics
.