22
Information about the
Operator
Interfaces
The remote management interface is similar to the front panel interface. The remote management
interface is accessible from any support
ed web browser. For more information on supported web
browsers, refer to
Browser
Requirements
. To manage the library from a remote management
interface, you must set up the librarys initial netwo
rk configuration from the front panel. For
information on network configuration settings for remote use, refer to
Configuring
Network
Settings
.
Menu Trees The following four menus o
rganize commands into logical groupings:
The Operations menu consists of commands that enable you to change the librarys mode of
operations, import and export cartridges, load and unload tape drives, eject magazines, clean
drive and change partition mode.
The Setup menu consists of commands that you can use to set up and configure various aspects
of the library, including network, partitions, I
/
E stations, cleaning
slots
, drive configuration, license,
password, menu timeout, date and time, barcode scan, an
d audible alarm.
The Reports menu consists of summaries of the values assigned during library setup. It also
includes viewing of RAS tickets and diagnostic logs.
The Tools menu consists of commands that you can use to maintain your library such as restore
default settings, reboot, prepare for shipping,
update
firmware, and run system tests.
Figure
14
Front
Panel
Interface
Menu
Tree and
Fig
ure
15
Remote
M
anagement
Interface
Top
Level
Menu
Tree
give an overview of the menus on the front panel
and the remote management interface.
Table
2.
Front
Panel
Interface
Menu
Structure
and
Table
3.
Remote
Management
Interface
Menu
Structure
describe
t
he
same menu
s
but with more details
.