12
Installing the Library
The library
will now continue its power
-
on sequence.
Note
Keep the
transport
locking screws i
n a safe place. You will need them
to lock the
robotics
if you need to return your
StorageLibrary
for service or repair.
Caution
The warranty does not cover
damage to t
he library if transported
without the
transport locking screws properly installed. See
Reinserting
the
Transport
Lock
ing
S
crews
for instructions on how to reinstall the
transport lock
ing screws
.
Figure
4.
Recommended
Storage of Transport Locking Screws
If the library is to be mounted in a rack, this is the time you should mount the
rack mount
ears to the
library. See instructions
in
Mounting
the
StorageLibrary
in
a R
ack
.
Mounting the StorageLibrary
in a Rack The
StorageLibrary
is designed for use in a 19 rack system using 4U of rack space. The length of the
power c
ord and the primary interface cables
restrict the placement.
The
StorageLibrary
is designed to operate in a horizontal position. Do not attempt to operate the
StorageLibrary
in any other position than horizontally. Also make sure that:
The airflow around
the front and back of
the
StorageLibrary
is not obstructed
.
There is a minimum of 60cm free space in front of the unit to allow the operator
to safely remove
the magazines
.
The display and operator
controls can easily be accessed
.
The
StorageLibrary
is awa
y from the floor and in a clean environment with temperatures within
specifications.
For specifications and safety information, see
Specifications
and
Safety
and
Regulatory
Information
.
The
Rack mounting
Kit includes the following items:
Rack mount
Ears (2 ears and 8 screws M
3x4
)
Left Rail
Assembly
Right
Rail
Assembly
Screw M6x12 (6 pieces)