Sprint Nextel 550 Windows, Locate the existing driver Update the driver, Replacing the Driver

the PCS Connection Card by observing which entries are affected when you eject and reinsert the card.

Replacing the Driver

1.If the installation CD is not already in your CD-ROM drive, insert it. If the CD start-up menu appears, use the exit option in the lower left corner of the screen to exit the menu.

2.Under Network adapters, click the PCS Connection Card entry.

3.Click the Properties button.

4.Click the Driver tab.

5.Click the Update Driver… button to launch the Update Device Driver Wizard.

6.Click Next.

7.Select Display a list of all the drivers in a specific location, so

you can select the one you want and click Next.

8.Click the Have Disk… button to open the Install From Disk window.

9.Enter d:\Drivers\Win98 where d is the drive letter for your CD-ROM drive. Click OK.

10.Click OK.

11.Click Next.

12.Click Finish.

13.Click No when prompted to restart your PC.

14.In the Control Panel Device Manager window, select the PCS Connection Card listing under Modem.

15.Repeat steps 3 to 12.

16.Restart your PC.

The correct driver should then be installed.

Windows 2000

To verify that the correct driver is installed:

▶Locate the existing driver

▶Update the driver

Locating the Driver

1.Close all Windows programs and open the Control Panel by selecting

Start > Settings > Control Panel.

2.If the card is not already inserted into your PC Card slot, insert it.

Section 3: Using the PCS Connection Card

102 3F: Troubleshooting Tips (Notebook PC)